Taguchi Analysis of Process Parameters for Improved Surface Roughness and Dimensional Accuracy in SLA-Printed Boron Nitride Polymer Composites
- 7 April 2025
- journal article
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Manufacturing Systems
- Vol. 24 (04) , 1011-1033
Abstract
This study examines how boron nitride (BN) affects the dimensional accuracy and surface roughness (SR) of polymer composites made using stereolithography (SLA) 3D printing. Photosensitive resin samples were reinforced using SLA procedures with different weight ratios of BN. Using the Taguchi approach to reduce experimental runs, the study looked at how four crucial process parameters– material composition, lifting speed, build angle, and cure time — affect SR and dimensional accuracy. The pattern and distribution of BN in the resin matrix were examined using microstructure analysis techniques such as energy-dispersive X-ray spectroscopy (EDAX) and scanning electron microscopy (SEM). The findings indicate that the construction angle has a considerable impact on dimensional accuracy (70.19%) and SR (82.22%), with material composition following at 12% and 16%, respectively. By using the orthogonal array L16, fewer tests were conducted and process parameters were improved, leading to SLA 3D-printed polymer composites Adding BN increases thermal conductivity, and reduces shrinkage during polymerization, all of which improves surface finish and dimensional accuracy. In addition to offering insightful information for improving SLA 3D printing procedures, this work emphasizes the significance of build angle and material composition — particularly the noteworthy influence of BN — in attaining accurate dimensional control and superior surface finish in SLA-printed composites.Keywords
This publication has 17 references indexed in Scilit:
- Effect of nanosized carbon nanotubes, Titanium Nitride and cubic Boron Nitride powders on mechanical and thermal properties of SLA 3D printed resin compositesPolymer Composites, 2024
- Parameter optimization for dimensional accuracy of fused deposition modelling partsMaterials Today: Proceedings, 2022
- In situ synthesis of polymer-modified boron nitride nanosheets via anionic polymerizationApplied Surface Science, 2021
- Stable boron nitride nanocomposites based membranes for high-efficiency proton conductionElectrochimica Acta, 2018
- Boron Nitride reinforced polylactic acid composites film for packaging: Preparation and propertiesPolymer Testing, 2018
- Perspective on Polylactic Acid (PLA) based Sustainable Materials for Durable Applications: Focus on Toughness and Heat ResistanceACS Sustainable Chemistry & Engineering, 2016
- Morphology and properties tuning of PLA/cellulose nanocrystals bio-nanocomposites by means of reactive functionalization and blending with PVAcPolymer, 2014
- Preparation of organically dispersible graphene nanosheet powders through a lyophilization method and their poly(lactic acid) compositesCarbon, 2010
- Application of Taguchi method in the optimization of cutting parameters for surface roughness in turningMaterials & Design (1980-2015), 2007
- Optimization of stereolithography process parameters for part strength using design of experimentsThe International Journal of Advanced Manufacturing Technology, 2005