A Comparative Study to Evaluate the Essential Work of Fracture to Measure the Fracture Toughness of Quasi-Brittle Material
Open Access
Abstract
In the present work, three different woven composite laminates were fabricated using the hand lay-up method. The woven reinforcement fibres were carbon fibres (CFRP), glass fibres (GFRP-W) and (GFRP-R) in combination with epoxy resin. Then, the central notch specimen tensile test (CNT) was used to measure the fracture toughness and the corresponding surface release energy (). Then, the data were compared with the essential work of fracture (we) values based on the stored energy of the body to obtain a new standard fracture toughness test for composite laminates using relatively simple techniques. In addition to an extended finite element model, XFEM was implemented over a central notch specimen geometry to obtain a satisfactory validation of the essential work of fracture concepts. Therefore, the average values of () were measured with CNT specimens 25.15 kJ/m2, 32.5 kJ/m2 and 20.22 kJ/m2 for CFRP, GFRP-W and GFRP-R, respectively. The data are very close as the percentage error for the surface release energy measured by the two methods was 0.83, 4.6 and 5.16 for carbon, glass and random fibre composite laminates, respectively. The data for the fracture toughness of XFEM are also very close. The percentage error is 4.6, 5.25 and 2.95 for carbon, glass and random fibre composite laminates, respectively. Therefore, the fundamental work of the fracture concept is highly recommended as a fracture toughness test for composite laminates or quasi-brittle Material.
Keywords
Funding Information
- Umm Al-Qura University (22UQU4361171DSR02)
This publication has 63 references indexed in Scilit:
- Effect of stacking sequence and geometric scaling on the brittleness number of glass fiber composite laminate with stress raiserScience and Engineering of Composite Materials, 2013
- Application of the essential work of fracture (EWF) concept for polymers, related blends and composites: A reviewProgress in Polymer Science, 2010
- On the essential work of fracture of linear low-density-polyethylene. I. Precision of the testing methodEngineering Fracture Mechanics, 2009
- Deformation mechanism under essential work of fracture process in polycyclo-olefin materialsExpress Polymer Letters, 2008
- Verification of stress-intensity factors for various middle-crack tension test specimensEngineering Fracture Mechanics, 2005
- In-plane shear properties of cross-ply composite laminates with different off-axis anglesComposite Structures, 2004
- A new method to evaluate the fracture toughness of thin filmsActa Materialia, 2004
- Effect of strain rate on the fracture toughness of some ductile polymers using the essential work of fracture (EWF) approachPolymer Engineering & Science, 2000
- Thickness dependence of cracking resistance in thin aluminium platesJournal of the Mechanics and Physics of Solids, 1999
- Elastic crack growth in finite elements with minimal remeshingInternational Journal for Numerical Methods in Engineering, 1999