New high-frequency linked half-bridge soft-switching PWM DC–DC converter with input DC rail side active edge resonant snubbers
- 1 September 2010
- journal article
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 3 (5) , 774-783
Abstract
This study presents a new circuit topology of the active edge resonant snubber-assisted half-bridge soft-switching PWM inverter-type DC–DC high-power converter for DC bus feeding power plants. The proposed DC–DC power converter is composed of a typical voltage source-fed half-bridge high-frequency PWM inverter with a high-frequency planar transformer link in addition to input DC busline side power semi-conductor switching devices for the PWM control scheme and parallel capacitive lossless snubbers. The operating principle of the new DC–DC converter treated here is described by using switching mode equivalent circuits, together with its unique features. All the active power switches in the half-bridge arms and input DC buslines can achieve zero current switching (ZCS) turn-on and zero voltage switching (ZVS) turn-off commutation transitions. The total turn-off switching losses of the power switches can be significantly reduced. As a result, a high-switching-frequency isolated gate bipolar transistor (IGBT) can be actually selected in the frequency range of 60 kHz under the principle of soft switching. The performance evaluations of the experimental setup are illustrated practically. The effectiveness of the new converter topology is proved for low-voltage and large-current DC–DC power supplies as DC bus feeding from a practical point of view.Keywords
This publication has 5 references indexed in Scilit:
- Active-Clamp Snubbers for Isolated Half-Bridge DC–DC ConvertersIEEE Transactions on Power Electronics, 2005
- Saturable reactor and lossless capacitor-assisted soft-switching asymmetrical PWM DC-DC converter with forward-flyback transformer link2002
- PWM converter-inverter arc welding machine using new type NCT2002
- Series-parallel load-resonant converterfor controlled-currentarc welding power supplyIEE Proceedings - Electric Power Applications, 1996
- A comparison of half-bridge resonant converter topologiesIEEE Transactions on Power Electronics, 1988