Effect of Ageing on the Mechanical Properties of Short Sisal Fibre Reinforced Polystyrene Composites
Authors:
- 1 May 2003
- journal article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 16 (3) , 249-271
Abstract
The water absorption behaviour and the effects of ageing on the mechanical properties of short sisal fibre reinforced polystyrene composites have been studied with special reference to fibre loading and fibre-matrix interface modification. The composites were subjected to different ageing conditions viz., immersion in boiling water for 24 h, immersion in cold water for 15 days and exposure to hot air at 80°C for five days. The interface modifications were performed by benzoylation, polystyrene maleic anhydride (PSMA) treatment, toluene diisocyanate treatment and silane treatment. The tensile properties and dimensions of the aged samples were measured and compared with unaged samples. The water uptake was found to increase with fibre loading and decrease with fibre modifications. However, PSMA treatment and silane treatment do not produce much variation in water uptake. The mechanical properties and dimensional stability of the treated fibre composites were found to be superior to those of untreated composites under identical ageing conditions. However, it is interesting to note that on water ageing, untreated fibre composites show minimum decrease in tensile strength compared to treated fibre composites and can be explained based on the thermal shrinkage of the polystyrene matrix. The superior properties of the treated composites were associated with the better interfacial interactions in treated fibre composites.Keywords
This publication has 16 references indexed in Scilit:
- Effect of cyclic moisture absorption desorption on the mechanical properties of silanized jute‐epoxy compositesPolymer Composites, 1999
- Effect of moisture content on the properties of silanized jute‐epoxy compositesPolymer Composites, 1997
- Tensile properties of short sisal fiber reinforced polystyrene compositesJournal of Applied Polymer Science, 1996
- Physical characterization of wood and wood‐polymer composites: An updateJournal of Applied Polymer Science, 1993
- Mechanical properties of the glass fibre-polyester interphaseJournal of Materials Science, 1992
- Composites of polyvinyl chloride—wood fibers: IV. Effect of the nature of fibersJournal of Vinyl and Additive Technology, 1989
- Thermal degradation of cellulose‐containing composites during processingJournal of Applied Polymer Science, 1989
- Use of wood fibres as reinforcing fillers for polystyreneMaterials Science and Engineering: A, 1988
- Jute reinforced polyester structuresPolymer Composites, 1984
- A Fickian Diffusion Model for Permeable Fibre Polymer CompositesJournal of Reinforced Plastics and Composites, 1983