Preparation of Gas Diffusion Electrodes by Electrophoretic Deposition
Authors:
- 1 January 2004
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 151 (3) , A354-A357
Abstract
Gas diffusion electrodes were prepared by precipitates deposited from carbon-polytetrafluoroethylene dispersions using an electrophoretic deposition technique. The amount of the precipitate deposited on the oppositely charged electrode varied with the electrode substrate, suggesting that ions dissolved from the anode have the ability to coagulate particles. A cross-sectional analysis of the precipitate showed the profile of a functionally graded material. The ability of the gas diffusion electrode using Pt as a catalyst in alkaline solution to promote oxygen reduction and hydrogen oxidation was high. The H2O2H2O2 fuel cell in which the gas diffusion electrodes were used generated 0.77 V at 0.3 A/cm2. © 2004 The Electrochemical Society. All rights reserved.Keywords
This publication has 15 references indexed in Scilit:
- Intermittent use of a low-cost alkaline fuel cell-hybrid system for electric vehiclesJournal of Power Sources, 1999
- Alkaline fuel cells for road tractionJournal of Power Sources, 1999
- Hydrogen oxidation characteristics of Raney nickel electrodes with carbon black in an alkaline fuel cellJournal of Power Sources, 1998
- Preparation of Raney–Ni gas diffusion electrode by filtration method for alkaline fuel cellsJournal of Applied Electrochemistry, 1997
- Fuel Cells1996
- Novel electrocatalysts for oxygen reductionElectrochimica Acta, 1992
- Pyrolyzed macrocycles on high surface area carbons for the reduction of oxygen in alkaline fuel cellsJournal of Power Sources, 1991
- Preliminary Analysis of Fuel Cell Derived Technologies Applied to Energy Conservation in the Chlor-alkali IndustrySeparation Science and Technology, 1990
- Structural analysis of alkaline fuel cell electrodes and electrode materialsJournal of Power Sources, 1989
- Chromium‐Doped Raney Nickel Catalyst for Hydrogen Electrodes in Alkaline Fuel CellsJournal of the Electrochemical Society, 1985