The Effect of Mechanical Activation of Fly Ash on Cement-Based Materials Hydration and Hardened State Properties
Open Access
Abstract
Fly ash from coal represents the foremost waste product of fossil fuel combustion. These waste materials are most widely utilised in the cement and concrete industries, but the extent of their use is insufficient. This study investigated the physical, mineralogical, and morphological characteristics of non-treated and mechanically activated fly ash. The possibility of enhancing the hydration rate of the fresh cement paste by replacing part of the cement with non-treated and mechanically activated fly ash, and the hardened cement paste’s structure and early compressive strength performance, were evaluated. At the first stage of the study, up to 20% mass of cement was replaced by untreated and mechanically activated fly ash to understand the impact of the mechanical activation on the hydration course; rheological properties, such as spread and setting time; hydration products; mechanical properties; and microstructure of fresh and hardened cement paste. The results show that a higher amount of untreated fly ash significantly prolongs the cement hydration process, decreases hydration temperature, deteriorates the structure and decreases compressive strength. Mechanical activation caused the breakdown of large porous aggregates in fly ash, enhancing the physical properties and reactivity of fly ash particles. Due to increased fineness and pozzolanic activity by up to 15%, mechanically activated fly ash shortens the time of maximum exothermic temperature and increases this temperature by up to 16%. Due to nanosized particles and higher pozzolanic activity, mechanically activated fly ash facilitates a denser structure, improves the contact zone between the cement matrix, and increases compressive strength up to 30%.Keywords
This publication has 73 references indexed in Scilit:
- Mechanical activation of fly ash: Effect on reaction, structure and properties of resulting geopolymerCeramics International, 2011
- Pozzolanic activity of clinoptilolite: A comparative study with silica fume, fly ash and a non-zeolitic natural pozzolanCement and Concrete Research, 2010
- The effect of grinding process on mechanical properties and alkali–silica reaction resistance of fly ash incorporated cement mortarsPowder Technology, 2010
- Mechanochemistry and mechanical activation of solidsRussian Chemical Reviews, 2006
- Influence of fly ash and its mean particle size on certain engineering properties of cement composite mortarsCement and Concrete Research, 2005
- Characterisation of fly ashes. Potential reactivity as alkaline cements☆Fuel, 2003
- Enhanced conductivity measurement techniques for evaluation of fly ash pozzolanic activityCement and Concrete Research, 2001
- The effect of fly ash composition on the expansion of concrete due to alkali–silica reactionCement and Concrete Research, 2000
- Permeability of concrete containing large amounts of fly ashCement and Concrete Research, 1994
- Final Report Siliceous by-products for use in concreteMaterials and Structures, 1988