Examination of the change of the overall heat transfer coefficients of building structures in function of water content
- 13 December 2013
- journal article
- research article
- Published by SAGE Publications in Building Services Engineering Research & Technology
- Vol. 35 (5) , 507-515
Abstract
Nowadays, the most applied insulation material in the building sector is the expanded polystyrene. Different types of expanded polystyrene are used but more widely used is the graphite added type. Our research focuses on the analysis of heat conductivity and sorption properties of expanded polystyrene as these two are the most important physical properties from energy saving point of view. In this paper, the variation of heat transfer coefficient of an insulated wall is analysed in function of humidity content of insulation material. Brick and concrete walls with 0.4 m thickness were chosen for substrate and 0.1 m expanded polystyrene (30, 100, 150, 200 and the so-called grey expanded polystyrene) materials were applied as insulating layers. The investigations of sorption behaviour of the materials are important from the point of view of fundamental research and building technology as well. Sorption data taken from our previous measurements results were used for predicting the change of the overall heat transfer coefficients of different wall structures constituted this way. Practical application: The present technical note is based on our previous measurement results. Water can cause undesirable changes in the building structures and introduced in this article. During the fixing procedure of the additional insulating of a given building bad weather conditions (high relative humidity and/or low external temperature) can dominate. These phenomena can be imagined for building new houses. By the ‘in-building’ of the moisture into the wall structure, numerous and measurable change can happen in the U-value of the building envelope. The presented changes are estimations only, but can be used and can also help for planning and executing the insulating process.Keywords
This publication has 9 references indexed in Scilit:
- Investigation of thickness and density dependence of thermal conductivity of expanded polystyrene insulation materialsMaterials and Structures, 2012
- Analysis of water sorption and thermal conductivity of expanded polystyrene insulation materialsBuilding Services Engineering Research & Technology, 2012
- Effect of moisture content on heat and moisture transport and storage properties of thermal insulation materialsEnergy and Buildings, 2012
- Method for the determination of sorption isotherms of materials demonstrated through soil samplesInternational Review of Applied Sciences and Engineering, 2011
- Transient model for coupled heat, air and moisture transfer through multilayered porous mediaInternational Journal of Heat and Mass Transfer, 2010
- A new procedure to measure water adsorption isotherms of porous fibrous materialsJournal of Porous Materials, 2007
- Water absorption of expanded polystyrene boardsPolymer Testing, 2006
- Water Sorption Isotherms of Some Building MaterialsDrying Technology, 2005
- Water-solid interactions: I. A technique for studying moisture sorption/desorptionInternational Journal of Pharmaceutics, 1995