Effects of Trueness and Surface Microhardness on the Fitness of Ceramic Crowns
Open Access
- 9 March 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (5) , 1858
Abstract
This study aims to evaluate the fitness, surface microhardness, and trueness of crowns fabricated from three types of dental ceramic blocks (HASS Rosetta, IPS e.max CAD, and VITA Suprinity) and analyze the correlations between them. A crown was first designed in computer-aided design (CAD) software. To create a crown designed model (CDM), the design file was extracted from the CAD software, and a lithium disilicate block was processed from the file with a milling machine. To create a crown scanned model (CSM), the inside of the fabricated crown was digitized using a contact scanner. Using three-dimensional (3D) inspection software (Geomagic Control X; 3D Systems), the CDM and CSM were then superimposed, and their 3D trueness was analyzed. To measure the surface microhardness of the blocks, the specimens were polished and subjected to the Vickers hardness test. The fitness of the fabricated crowns was evaluated by applying a modified silicone replica technique. Pearson correlation analysis was performed to assess the correlations between trueness, surface microhardness, and fitness. In addition, the significance of differences between the three types of dental ceramic blocks was analyzed using one-way analysis of variance (ANOVA). Significant differences in the trueness, surface microhardness, and marginal fit were observed between ceramic blocks of different types. There were also positive correlations between trueness, surface microhardness, marginal fit, and internal fit. While the marginal fit of crowns fabricated from each of the three types of ceramic blocks was in the clinically permitted range (<120 µm), there were differences in the trueness and surface microhardness, depending on the type of block. However, crowns fabricated from each of the three materials have surface microhardness that is clinically applicable.Keywords
Funding Information
- Technology Innovation Program (10077743)
- Industrial Strategic Technology Development Program (10062635)
- Korea Institute for Advancement of Technology (P0006691)
This publication has 22 references indexed in Scilit:
- Machinability: Zirconia-reinforced lithium silicate glass ceramic versus lithium disilicate glass ceramicJournal of the Mechanical Behavior of Biomedical Materials, 2020
- Comparative reproducibility analysis of 6 intraoral scanners used on complex intracoronal preparationsThe Journal of Prosthetic Dentistry, 2020
- Trueness and precision of 5 intraoral scanners for scanning edentulous and dentate complete-arch mandibular casts: A comparative in vitro studyThe Journal of Prosthetic Dentistry, 2019
- A Comparative Study of the Fitness and Trueness of a Three-Unit Fixed Dental Prosthesis Fabricated Using Two Digital WorkflowsApplied Sciences, 2019
- Comparison of the Trueness of Lithium Disilicate Crowns Fabricated From All-in-One and Combination CAD/CAM SystemsThe International Journal of Prosthodontics, 2019
- Feasibility of using an intraoral scanner for a complete-arch digital scanThe Journal of Prosthetic Dentistry, 2019
- Comparative Study of the Trueness of the Inner Surface of Crowns Fabricated from Three Types of Lithium Disilicate BlocksApplied Sciences, 2019
- Trueness analysis of zirconia crowns fabricated with 3-dimensional printingThe Journal of Prosthetic Dentistry, 2019
- Survival of all-ceramic restorations after a minimum follow-up of five years: A systematic review2016
- A 3-dimensional accuracy analysis of chairside CAD/CAM milling processesThe Journal of Prosthetic Dentistry, 2014