High-Performance Fluorine-Lean Thin Aromatic Hydrocarbon Membranes Based on Polyvinylidene Fluoride for Hydrogen Fuel Cells
Open Access
Abstract
The impeding ban on per- and polyfluoroalkyl substances (PFAS) prompted researchers to focus on hydrocarbon-based materials as constituents of next-generation proton exchange membranes (PEMs) for polymer electrolyte fuel cells (PEFCs). Here, we report on the fuel cell performance and durability of fluorine-lean PEMs prepared by the post-sulfonation of co-grafted α-methylstyrene (AMS) and 2-methylene glutaronitrile (MGN) monomers into preirradiated 12 µm polyvinylidene fluoride (PVDF) base film. The membranes were subjected to two distinctly different accelerated stress test (AST) protocols performed at open-circuit voltage (OCV): the US Department of Energy-similar chemical AST (90 °C, 30% relative humidity (RH), H2/air, 1 bara), developed originally for perfluoroalkylsulfonic acid (PFSA) membranes, and the high relative humidity AST (80 °C, 100% RH, H2/O2, 2.5 bara), designed for aromatic hydrocarbon membranes. We found that doping the grafted membranes with a metalated porphyrin antioxidant can simultaneously reduce membrane aging and improve fuel cell performance.Keywords
Funding Information
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (175493)
This publication has 38 references indexed in Scilit:
- A Nature‐Inspired Antioxidant Strategy based on Porphyrin for Aromatic Hydrocarbon Containing Fuel Cell Membranes**ChemSusChem, 2023
- Fuel cell system production cost modeling and analysisEnergy Reports, 2022
- Advances in perfluorosulfonic acid-based proton exchange membranes for fuel cell applications: A reviewChemical Engineering Journal Advances, 2022
- Polymer Design Strategies for Radiation‐Grafted Fuel Cell MembranesAdvanced Energy Materials, 2013
- Influence of Radiation‐Induced Grafting Process on Mechanical Properties of ETFE‐Based Membranes for Fuel CellsFuel Cells, 2010
- Influence of pre-irradiation atmosphere on the properties of polymer electrolyte membranes prepared using radiation grafting methodJournal of Materials Science, 2006
- Comparative study on the preparation and properties of radiation‐grafted polymer electrolyte membranes based on fluoropolymer filmsJournal of Applied Polymer Science, 2006
- Characterization of gas crossover and its implications in PEM fuel cellsAIChE Journal, 2006
- Prospects for Alkaline Anion‐Exchange Membranes in Low Temperature Fuel CellsFuel Cells, 2005
- Pre‐Irradiation Grafting of Styrene/Divinylbenzene onto Poly(tetrafluoroethylene‐co‐hexafluoropropylene) from Non‐SolventsHelvetica Chimica Acta, 2003