Range Image-Aided Edge Line Estimation for Dimensional Inspection of Precast Bridge Slab Using Point Cloud Data
Open Access
- 10 August 2023
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 15 (16) , 12243
Abstract
The accurate estimation of edge lines in precast bridge slabs based on laser scanning is crucial for a geometrical quality inspection. Normally, the as-designed model of precast slabs is used to match with laser scan data to estimate the edge lines. However, this approach often leads to an inaccurate quality measurement because the actually produced slab can be dimensionally different from the as-designed model or the inexistence of the as-designed model. In order to overcome this limitation, this study proposes a novel algorithm that generates and utilizes range images generated from scan points to enhance accuracy. The proposed algorithm operates as follows: first, the scan points are transformed into a range of images, and the corner points of these range images are extracted using a Harris corner detector. Next, the dimensions of the precast bridge slab are computed based on the extracted corner points. Consequently, the extracted corner points from the range images serve as an input for edge line estimation, thereby eliminating the matching errors that could arise when aligning collected scan points to an as-designed model. To evaluate the feasibility of the proposed edge estimation algorithm, a series of tests were conducted on both lab-scale specimens and field-scale precast slabs. The results showed promising accuracy levels of 1.22 mm for lab-scale specimens and 3.10 mm for field-scale precast bridge slabs, demonstrating more accurate edge line estimation results compared to traditional methods. These findings highlight the feasibility of employing the proposed image-aided geometrical inspection method, demonstrating the great potential for application in both small-scale and full-scale prefabricated construction elements within the construction industry, particularly during the fabrication stage.Keywords
Funding Information
- Korea Agency for Infrastructure Technology Advancement under the Ministry of Land, Infrastructure and Transport (21SMIP-A156887-02, B220201111)
- Chungbuk National University BK21 Program (21SMIP-A156887-02, B220201111)
- Hohai University (21SMIP-A156887-02, B220201111)
This publication has 32 references indexed in Scilit:
- Rapid data quality oriented laser scan planning for dynamic construction environmentsAdvanced Engineering Informatics, 2016
- Automated assembly discrepancy feedback using 3D imaging and forward kinematicsAutomation in Construction, 2015
- Step edge detection method for 3D point clouds based on 2D range imagesOptik, 2015
- Automated dimensional quality assessment of precast concrete panels using terrestrial laser scanningAutomation in Construction, 2014
- Effect of spatial resolution on classification errors of pure and mixed pixels in remote sensingIEEE Transactions on Geoscience and Remote Sensing, 2001
- SUSAN—A New Approach to Low Level Image ProcessingInternational Journal of Computer Vision, 1997
- The dissimilarity corner detector1991
- Design of an image edge detection filter using the Sobel operatorIEEE Journal of Solid-State Circuits, 1988
- A Computational Approach to Edge DetectionIEEE Transactions on Pattern Analysis and Machine Intelligence, 1986
- Random sample consensusCommunications of the ACM, 1981