Study on Microstructural Evolution and Strength Growth and Fracture Mechanism of Cemented Paste Backfill
Authors:
Open Access
- 1 January 2016
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2016, 1-13
Abstract
The relations among the uniaxial compressive strength of cemented paste backfill (CPB) with solid phase mass fraction, cement sand ratio, and curing age were studied. The UCS of CPB samples increased exponentially with the increase of solid phase mass fraction and curing age but increased linearly with the increase of cement sand ratio. The results of X-ray diffraction (XRD) and scanning electron microscope (SEM) showed that the strength was determined by the amount of ettringite and C-S-H gelling. With the increase of ettringite and C-S-H gelling, the strength became larger. The triaxial compression test was conducted by selecting four kinds of CPB samples. The results showed that, with the increase of confining pressure, peak and residual strength became larger, but the elastic modulus decreased. When the ratio of confining pressure and uniaxial strength is about 1 : 2, the CPB samples show significant ductility characteristics and the ratio of residual strength and peak strength increased obviously.Keywords
Funding Information
- National Natural Science Foundation of China (5137403, FRF-TP-15-042A1)
- Fundamental Research Funds for the Central Universities (5137403, FRF-TP-15-042A1)
This publication has 16 references indexed in Scilit:
- Effect of curing under pressure on compressive strength development of cemented paste backfillMinerals Engineering, 2009
- Mix proportioning of underground cemented tailings backfillTunnelling and Underground Space Technology, 2008
- Modeling the effect of sulphate on strength development of paste backfill and binder mixture optimizationCement and Concrete Research, 2005
- Experimental characterization of the influence of tailings fineness and density on the quality of cemented paste backfillMinerals Engineering, 2005
- A contribution to understanding the hardening process of cemented pastefillMinerals Engineering, 2004
- The effect of desliming by sedimentation on paste backfill performanceMinerals Engineering, 2003
- Rheological characterisation of κ-carrageenan/locust bean gum mixturesCarbohydrate Polymers, 2001
- Mix proportioning of high performance concreteCement and Concrete Composites, 2001
- Characterisation of xanthan gum solutions using dynamic light scattering and rheologyCarbohydrate Polymers, 2000
- Cementitious backfill with high sulfur content Physical, chemical, and mineralogical characterizationCement and Concrete Research, 1999