Passivity and its breakdown on low temperature plasma carburized AISI 204Cu stainless steel in chloride‐containing solution
- 27 November 2017
- journal article
- other
- Published by Wiley in Materials and Corrosion
- Vol. 69 (5) , 563-571
Abstract
The passivity and passivity breakdown of low temperature plasma carburized AISI 204Cu stainless steel were studied in borate buffer solution (pH 8.4) in the absence and presence of 150 mM KCl, performing potentiodynamic polarization, potentiostatic transients, and electrochemical impedance spectroscopy (EIS) measurements complemented with scanning electron microscopy (SEM). In the absence of chloride ions, the surface treatment exercise a beneficial role in the passivating characteristics of AISI 204Cu. Plasma carburizing significantly modifies the electrochemical response of 204Cu steel resulting in a more stable passive film. In the presence of chloride ions, both the untreated and plasma carburized specimen experience localized corrosion (pitting). However, plasma carburizing increases the breakdown potential and the extent of passivation domain, indicating improved resistance to initiation of pitting corrosion. Furthermore, EIS measurements performed at the breakdown state evidenced higher Rct and lower depression angle values for the carburized specimen compared to the untreated alloy, confirming its better localized corrosion behavior. The high amount of interstitial carbon is believed to be responsible for the enhanced protective function of passive film which exerts an effective inhibiting action towards the localized corrosion process.Keywords
This publication has 24 references indexed in Scilit:
- Current Status of Supersaturated Surface Engineered S-Phase MaterialsKey Engineering Materials, 2008
- Tribological properties of stainless steels treated by colossal carbon supersaturationWear, 2007
- Carbide precipitation in austenitic stainless steel carburized at low temperatureActa Materialia, 2007
- Effect of molybdenum on hardness of low-temperature plasma carburized austenitic stainless steelSurface and Coatings Technology, 2007
- Improving the erosion–corrosion resistance of AISI 316 austenitic stainless steel by low-temperature plasma surface alloying with N and CMaterials Science and Engineering: A, 2006
- Kinetics of low temperature plasma carburizing of austenitic stainless steelsJournal of Materials Processing Technology, 2005
- Metallurgical characteristics of the plasma (ion)-carburized layer of austenitic stainless steel SUS316LSurface and Coatings Technology, 2005
- Fundamentals of Electrochemical Corrosion2000
- Low temperature plasma carburising of austenitic stainless steels for improved wear and corrosion resistanceSurface Engineering, 1999
- Metallurgical study of low-temperature plasma carbon diffusion treatments for stainless steelsSurface and Coatings Technology, 1993