Superior Mechanical Behavior and Fretting Wear Resistance of 3D-Printed Inconel 625 Superalloy
Open Access
- 1 December 2018
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 8 (12) , 2439
Abstract
Additive manufacturing (AM) nickel-based superalloys have been demonstrated to equate or exceed mechanical properties of cast and wrought counterparts but their tribological potentials have not been fully realized. This study investigates fretting wear behaviors of Inconel 625 against the 42 CrMo4 stainless steel under flat-on-flat contacts. Inconel 625 is prepared by additive manufacturing (AM) using the electron beam selective melting. Results show that it has a high hardness (335 HV), superior tensile strength (952 MPa) and yield strength (793 MPa). Tribological tests indicate that the AM-Inconel 625 can suppress wear of the surface within a depth of only ~2.4 μm at a contact load of 106 N after 2 × 104 cycles. The excellent wear resistance is attributed to the improved strength and the formation of continuous tribo-layers containing a mixture of Fe2O3, Fe3O4, Cr2O3 and Mn2O3.Keywords
This publication has 71 references indexed in Scilit:
- Wear estimation of ceramic and coated carbide tools in turning of Inconel 625: 3D FE analysisTribology International, 2016
- Microstructure Characteristics of Inconel 625 Superalloy Manufactured by Selective Laser MeltingJournal of Materials Science & Technology, 2015
- Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts: Tailored microstructures and enhanced performanceMaterials Science and Engineering: A, 2015
- Fatigue performance of additive manufactured metallic partsRapid Prototyping Journal, 2013
- Mechanical property study on rapid additive layer manufacture Hastelloy® X alloy by selective laser melting technologyThe International Journal of Advanced Manufacturing Technology, 2011
- Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser meltingMaterials Characterization, 2011
- Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powderApplied Surface Science, 2007
- Investigating laser rapid manufacturing for Inconel-625 componentsOptics & Laser Technology, 2007
- Microstructure and mechanical properties of Inconel 625 superalloyJournal of Nuclear Materials, 2001
- Fretting wear of inconel 625 at high temperature and in high vacuumWear, 1985