The Morphology and Solute Segregation of Dendrite Growth in Ti-4.5% Al Alloy: A Phase-Field Study
Open Access
- 27 November 2021
- Vol. 14 (23) , 7257
Abstract
Ti-Al alloys have excellent high-temperature performance and are often used in the manufacture of high-pressure compressors and low-pressure turbine blades for military aircraft engines. However, solute segregation is easy to occur in the solidification process of Ti-Al alloys, which will affect their properties. In this study, we used the quantitative phase-field model developed by Karma to study the equiaxed dendrite growth of Ti-4.5% Al alloy. The effects of supersaturation, undercooling and thermal disturbance on the dendrite morphology and solute segregation were studied. The results showed that the increase of supersaturation and undercooling will promote the growth of secondary dendrite arms and aggravate the solute segregation. When the undercooling is large, the solute in the root of the primary dendrite arms is seriously enriched, and when the supersaturation is large, the time for the dendrite tips to reach a steady-state will be shortened. The thermal disturbance mainly affects the morphology and distribution of the secondary dendrite arms but has almost no effect on the steady-state of the primary dendrite tips. This is helpful to understand the cause of solute segregation in Ti-Al alloy theoretically.Keywords
Funding Information
- National Natural Science Foundation of China (51774253)
This publication has 40 references indexed in Scilit:
- Processing Maps for Hot Working Behavior of a PM TiAl AlloyJournal of Materials Science & Technology, 2011
- Microsegregation, macrosegregation and related phase transformations in TiAl alloysIntermetallics, 2011
- Phase–field model of isothermal solidification with multiple grain growthChinese Physics B, 2009
- Quantitative phase-field modeling for dilute alloy solidification involving diffusion in the solidPhysical Review E, 2009
- Phase-field simulation of structure evolution at high growth velocities during directional solidification of Ti55Al45 alloyIntermetallics, 2005
- Quantitative phase-field model of alloy solidificationPhysical Review E, 2004
- Numerical simulation of off-centred porosity formation of TiAl-based alloy exhaust valve during vertical centrifugal castingModelling and Simulation in Materials Science and Engineering, 2003
- Phase-Field Formulation for Quantitative Modeling of Alloy SolidificationPhysical Review Letters, 2001
- Quantitative phase-field modeling of dendritic growth in two and three dimensionsPhysical Review E, 1998
- Phase-field method for computationally efficient modeling of solidification with arbitrary interface kineticsPhysical Review E, 1996