Experimental and numerical optimization of pressurized air vessel performance for water hammer mitigation
Authors:
Open Access
- 12 November 2025
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-18
Abstract
Controlling water hammer pressure is essential, necessitates a transient surge analysis to identify critical pressure points along a pipeline system. A pressurized air vessel is a pressure control device used to control both positive and negative pressure fluctuations. This study investigates three key parameters that affect the sizing of the pressurized air vessel: orifice diameter (the throttling aperture), the vessel diameter, and water volume fraction ratio. A mathematical model, developed using the FORTRAN programming language and based on the unsteady one-dimensional momentum and continuity equations, determines the optimal sizing of these parameters. These equations are solved using the method of characteristics, and the pressurized air vessel is mathematically modelled as a quasi-one-dimensional flow system. An experimental test rig, equipped with a rapid closing solenoid valve and pressure sensors, is used to validate the mathematical model results. Both the experimental and numerical results demonstrate the effectiveness of the pressurized air vessel to dampen water hammer pressure. The findings indicate that the throttling action has a significant effect on the required size of the pressurized air vessel. This study presents a novel approach that provides quantitative insights into key parameters that affect the performance of the pressurized air vessel by using the combined modelling and experimental validation. The orifice diameter is the most influential parameter on the water hammer head, vessel air head, and water level inside the vessel.Keywords
Funding Information
- Ain Shams University
This publication has 30 references indexed in Scilit:
- Reducing the water hammering, surges, and slamming caused by check valve closure in a wastewater pumping station by using a swing flex check valveFlow Measurement and Instrumentation, 2025
- Dynamic analysis and shape sensing of pipes subjected to water hammer by the inverse finite element methodMeasurement, 2024
- Review on water-hammer waves mechanical and theoretical foundationsEuropean Journal of Mechanics - B/Fluids, 2024
- Experimental study on the effects of two-stage valve closure on the maximum water hammer pressure in micro-hydroelectric systemJournal of Water Process Engineering, 2024
- Instantaneous acceleration-based modeling of pumping systems response under transient eventsInternational Journal of Mechanical Sciences, 2022
- Multi-objective optimization of hydraulic transient condition in a pump-turbine hydropower considering the wicket-gates closing law and the surge tank positionRenewable Energy, 2020
- Optimal Size and Placement of Water Hammer Protective Devices in Water Conveyance PipelinesWater Resources Management, 2018
- Dual-technique-based inline design strategy for water-hammer control in pressurized pipe flowActa Mechanica, 2017
- Numerical analysis of the hydraulic transient response in the presence of surge tanks and relief valvesRenewable Energy, 2017
- Encapsulation of air vessel design in a neural networkApplied Mathematical Modelling, 2006