Modeling of a Small Helical Magnetic Flux-Compression Generator
Authors:
- Nils BrenningNBNils Brenning
- Tomas HurtigTHTomas Hurtig
- Anders LarssonALAnders Larsson
- Bucur M. NovacBNBucur M. Novac
- Sten E. NyholmSNSten E. Nyholm
- 17 November 2008
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 36 (5) , 2662-2672
Abstract
In order to gain experience in explosive pulsed power and to provide experimental data as the basis for computer modeling, a small high-explosive-driven helical magnetic flux-compression generator (FCG) was designed at the Swedish Defence Research Agency. The generator, of which three have been built, has an overall length of 300 mm and a diameter of 70 mm. It could serve as the energy source in a pulse-forming network to generate high-power pulses for various loads. This paper presents a simulation model of this helical FCG. The model, which was implemented in Matlab-Simulink, uses analytical expressions for the generator inductance. The model of resistive losses takes into account the heating of the conductors and the diffusion of the magnetic field into the conductors. The simulation results are compared with experimental data from two experiments with identical generators but with different seed currents, influencing the resistive losses. The model is used to analyze the performance of the generator.Keywords
This publication has 16 references indexed in Scilit:
- Small Helical Magnetic Flux-Compression Generators: Experiments and AnalysisIEEE Transactions on Plasma Science, 2008
- A 10-GW Pulsed Power Supply for HPM SourcesIEEE Transactions on Plasma Science, 2006
- The mark IX generator2005
- An Armature-Stator Contact Resistance Model for Explosively Driven Helical Magnetic Flux Compression Generators2005
- EXPLOSIVE AXIAL MAGNETIC FLUX COMPRESSION GENERATOR ARMATURE MATERIAL STRENGTH AND COMPRESSION EFFECTS2004
- Quantification of Ohmic and Intrinsic Flux Losses in Helical Flux Compression GeneratorsIEEE Transactions on Plasma Science, 2004
- Dynamic deformation of a solenoid wire due to internal magnetic pressure, revised2004
- Conductivity measurements of explosively shocked aluminum and OFHC copper used for armature material in a magnetic flux compression generator2004
- Practical Improvements to the Lee-More Conductivity Near the Metal-Insulator TransitionContributions to Plasma Physics, 2001
- High-Inductance Explosive Magnetic Generators with High Energy Multiplication1980