Effects of thin high-Z layers on the hydrodynamics of laser-accelerated plastic targets
Authors:
- 23 April 2002
- journal article
- conference paper
- Published by AIP Publishing in Physics of Plasmas
- Vol. 9 (5) , 2234-2243
Abstract
Experimental results and simulations that study the effects of thin metallic layers with high atomic number (high-Z) on the hydrodynamics of laser accelerated plastic targets are presented. These experiments employ a laser pulse with a low-intensity foot that rises into a high-intensity main pulse. This pulse shape simulates the generic shape needed for high-gain fusion implosions. Imprint of laser nonuniformity during start up of the low intensity foot is a well-known seed for hydrodynamic instability. Large reductions are observed in hydrodynamic instability seeded by laser imprint when certain minimum thickness gold or palladium layers are applied to the laser-illuminated surface of the targets. The experiment indicates that the reduction in imprint is at least as large as that obtained by a 6 times improvement in the laser uniformity. Simulations supported by experiments are presented showing that during the low intensity foot the laser light can be nearly completely absorbed by the high-Z layer. X rays originating from the high-Z layer heat the underlying lower-Z plastic target material and cause large buffering plasma to form between the layer and the accelerated target. This long-scale plasma apparently isolates the target from laser nonuniformity and accounts for the observed large reduction in laser imprint. With onset of the higher intensity main pulse, the high-Z layer expands and the laser light is transmitted. This technique will be useful in reducing laser imprint in pellet implosions and thereby allow the design of more robust targets for high-gain laser fusion.Keywords
This publication has 27 references indexed in Scilit:
- High-gain direct-drive target design for laser fusionPhysics of Plasmas, 2000
- Reduction of early-time perturbation growth in ablatively driven laser targets using tailored density profilesPhysics of Plasmas, 1999
- Laser Imprint Reduction Using a Low-Density Foam Buffer as a Thermal Smoothing Layer at 351-nm WavelengthPhysical Review Letters, 1998
- Computational modeling of direct-drive fusion pellets and KrF-driven foil experimentsPhysics of Plasmas, 1998
- Comparison of Drive-Seeded Modulations in Planar Foils for 0.35 and 0.53Laser DrivePhysical Review Letters, 1998
- Comparison of beam-smoothing methods for direct-drive inertial confinement fusionJournal of the Optical Society of America B, 1997
- Simulations of laser imprint for Nova experiments and for ignition capsulesPhysics of Plasmas, 1997
- Evaluation of a Foam Buffer Target Design for Spatially Uniform Ablation of Laser-Irradiated PlasmasPhysical Review Letters, 1995
- Use of X-Ray Preheated Foam Layers to Reduce Beam Structure Imprint in Laser-Driven TargetsPhysical Review Letters, 1995
- Improvement of Beam Nonuniformity Smoothing Due to X Radiation in Laser-Driven Layered TargetsPhysical Review Letters, 1984