Energy Neutral Wireless Bolt for Safety Critical Fastening
Open Access
Abstract
Thermoelectric generators (TEGs) are now capable of powering the abundant low power electronics from very small (just a few degrees Celsius) temperature gradients. This factor along with the continuously lowering cost and size of TEGs, has contributed to the growing number of miniaturized battery-free sensor modules powered by TEGs. In this article, we present the design of an ambient-powered wireless bolt for high-end electro-mechanical systems. The bolt is equipped with a temperature sensor and a low power RF chip powered from a TEG. A DC-DC converter interfacing the TEG with the RF chip is used to step-up the low TEG voltage. The work includes the characterizations of different TEGs and DC-DC converters to determine the optimal design based on the amount of power that can be generated from a TEG under different loads and at temperature gradients typical of industrial environments. A prototype system was implemented and the power consumption of this system under different conditions was also measured. Results demonstrate that the power generated by the TEG at very low temperature gradients is sufficient to guarantee continuous wireless monitoring of the critical fasteners in critical systems such as avionics, motorsport and aerospace.Keywords
This publication has 23 references indexed in Scilit:
- An Extensive Unified Thermo-Electric Module Characterization MethodSensors, 2016
- Fast Thermal Characterization of Thermoelectric Modules Using Infrared CameraIEEE Transactions on Instrumentation and Measurement, 2016
- Autonomous soil moisture sensor based on nanostructured thermosensitive resistors powered by an integrated thermoelectric generatorSensors and Actuators A: Physical, 2016
- A Thermoelectric Energy Harvester with a Cold Start of 0.6°CMaterials Today: Proceedings, 2015
- Research on a Power Management System for Thermoelectric Generators to Drive Wireless Sensors on a Spindle UnitSensors, 2014
- A dual polarity, cold-starting interface circuit for heat storage energy harvestersSensors and Actuators A: Physical, 2014
- Implementation of Thermoelectric Generators in Airliners for Powering Battery-Free Wireless Sensor NetworksJournal of Electronic Materials, 2014
- Energy Harvesting Thermoelectric Generators Manufactured Using the Complementary Metal Oxide Semiconductor ProcessSensors, 2013
- Flexible thermoelectric generator for human body heat energy harvestingElectronics Letters, 2012
- Characterization of Thermoelectric Modules for Powering Autonomous SensorsIEEE Transactions on Instrumentation and Measurement, 2008