Investigation on Operating Processes for a New Solar Cooling Cogeneration Plant
- 2 May 2014
- journal article
- Published by ASME International in Journal of Solar Energy Engineering
- Vol. 136 (3) , 031016
Abstract
Some commercial units and industries need more amount of cooling than the power such as cold storage, shopping complex, etc. In this work, a new cooling cogeneration cycle (Srinivas cycle) has been proposed and solved to generate more cooling with adequate power generation from single source of heat at hot climatic conditions with ammonia–water mixture as a working fluid. The operational processes conditions for the proposed cooling cogeneration plant are different compared to the power-only (Kalina cycle system) system and cooling-only (vapor absorption refrigeration) system. This work focused to generate the optimum working conditions by parametric analysis from thermodynamic point of view. An increase in cycle maximum temperature is only supporting the power generation but not the cooling output. Cooling output is also 15 times more than power generation. So, it has been recommended to operate the integrated plant with low temperature heat recovery. The resulted cycle thermal efficiency, plant thermal efficiency, specific power, specific cooling, cycle power efficiency, cycle coefficient of performance (COP), and solar collector's specific area are 27%, 10%, 15 kW, 220 kW, 1.8%, 0.25, and 10 m2/kW, respectively.Keywords
This publication has 15 references indexed in Scilit:
- Design and modeling of low temperature solar thermal power stationApplied Energy, 2012
- Biomass-fuelled integrated power and refrigeration systemProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2011
- A review of thermally activated cooling technologies for combined cooling, heating and power systemsProgress in Energy and Combustion Science, 2011
- Parametric analysis for a new combined power and ejector–absorption refrigeration cycleEnergy, 2009
- Parametric analysis and optimization for a combined power and refrigeration cycleApplied Energy, 2008
- Design, manufacture and testing of fiberglass reinforced parabola trough for parabolic trough solar collectorsSolar Energy, 2007
- Thermodynamic analysis of a novel absorption power/cooling combined-cycleApplied Energy, 2006
- Experimental investigation of a vapor absorption refrigeration systemInternational Journal of Refrigeration, 2004
- Heat recovery system to power an onboard NH3-H2O absorption refrigeration plant in trawler chiller fishing vesselsApplied Thermal Engineering, 1998
- Design parameters of an aqua-ammonia vapour absorption refrigeration systemHeat Recovery Systems and CHP, 1988