Effect of halloysite nanotubes on curing behavior, mechanical, and microstructural properties of acrylonitrile–butadiene rubber nanocomposites
Authors:
- 4 February 2013
- journal article
- research article
- Published by SAGE Publications in Journal of Elastomers & Plastics
- Vol. 46 (6) , 483-498
Abstract
Halloysite nanotubes (HNTs) have been used as a new type of filler for acrylonitrile–butadiene rubber (NBR) matrix. The NBR/HNT nanocomposites were prepared using a two-roll mill by adding 0–7 parts per hundred rubber (phr) HNTs, and the effect of the loading of HNTs on the curing behavior, mechanical, and microstructural properties were also investigated in this study. The cure characteristics showed that the cure time ( t90) and scorch time ( ts2) decreased, whereas the maximum torque ( MH) exhibited an increasing trend from 0 to 7 phr. The tensile properties improved until optimum loading of HNTs (5 phr) and thermal stability increased with increasing HNT loading. The morphological study revealed the HNTs homogeneously dispersed inside the NBR matrix and good interaction occurred between HNTs and NBR.Keywords
This publication has 29 references indexed in Scilit:
- Preparation and properties of natural nanocomposites based on natural rubber and naturally occurring halloysite nanotubesMaterials & Design (1980-2015), 2010
- Development of nitrile butadiene rubber–nanoclay composites with epoxidized natural rubber as compatibilizerMaterials & Design (1980-2015), 2009
- Morphological, thermal and tensile properties of halloysite nanotubes filled ethylene propylene diene monomer (EPDM) nanocompositesPolymer Testing, 2008
- Preparation, structure and properties of nitrile–butadiene rubber–organoclay nanocomposites by reactive mixing intercalation methodJournal of Applied Polymer Science, 2006
- Nanocomposites prepared from acrylonitrile–butadiene rubber and organically modified montmorillonite with vinyl groupsNanotechnology, 2005
- Mechanical, thermal, and barrier properties of NBR/organosilicate nanocompositesPolymer Engineering & Science, 2004
- Preparation and properties of nanocomposites based on acrylonitrile–butadiene rubber, styrene–butadiene rubber, and polybutadiene rubberJournal of Polymer Science Part B: Polymer Physics, 2004
- Structure and properties of nitrile rubber (NBR)–clay nanocomposites by co‐coagulating NBR latex and clay aqueous suspensionJournal of Applied Polymer Science, 2003
- Preparation and characterization of polypropylene/silver nanocomposite fibersPolymer International, 2003
- Fracture behaviour of acrylonitrile–butadiene rubber/clay nanocompositePolymer International, 2001