Mechanical Performance of Single-Graded Copolymer-Modified Pervious Concrete in a Corrosive Environment
Open Access
- 29 November 2021
- Vol. 14 (23) , 7304
Abstract
Polymer-modified cement has found numerous applications due to its excellent tensile strength. When cement was modified with a single polymer, its tensile strength and performance marginally increased. However, when a small amount of the flexible polymer latex was added to cement, the mechanical performance of cement considerably improved. In this study, single-graded copolymer-modified pervious concrete was prepared by mixing styrene-butadiene rubber (SBR) with different acrylate polymers, and its mechanical performance and durability were systematically studied through mechanical tests and theoretical analyses. The main findings are as follows: (1) When a waterborne emulsion was added, the freeze resistance of cement concrete increased, and its mass loss rate decreased. Cement concrete with two latexes had higher sulphate corrosion resistance and substantially lower dry shrinkage strain than ordinary cement concrete. (2) Through scanning electron microscopy, the microstructural changes in the cement binder, ordinary polymer-modified concrete, and the copolymer-modified cement concrete used in this study were observed, and the findings were compared with those reported in the literature. (3) Single-graded copolymer-modified pervious concrete exhibited excellent shrinkage performance. This study showed that single-graded copolymer-modified pervious concrete satisfied the performance requirements for use as a paving material for special cases.Keywords
Funding Information
- China Postdoctoral Science Foundation (NSFC51408091)
This publication has 20 references indexed in Scilit:
- Polymer-modified pervious concrete for durable and sustainable transportation infrastructuresConstruction and Building Materials, 2016
- Strength, fracture and fatigue of pervious concreteConstruction and Building Materials, 2013
- Examining the possibility to estimate the influence of admixtures on pore structure of self-compacting concrete using the air void analyzerConstruction and Building Materials, 2013
- Mechanical properties of pervious cement concreteJournal of Central South University, 2012
- Neutron radiography, a powerful method to determine time-dependent moisture distributions in concreteNuclear Engineering and Design, 2011
- Durability assessment of epoxy modified concreteConstruction and Building Materials, 2010
- Laboratory evaluation of permeability and strength of polymer-modified pervious concreteConstruction and Building Materials, 2010
- Emulsion copolymerization of styrene and butyl acrylate in the presence of a chain transfer agent.Chemical Engineering Science, 2010
- Durability of Styrene-Butadiene latex modified concreteCement and Concrete Research, 1997
- The evolution of the microstructure in styrene acrylate polymer-modified cement pastes at the early stage of cement hydrationAdvanced Cement Based Materials, 1996