Compatibility of poly(acrylic acid)/starch blends
- 4 June 2015
- journal article
- research article
- Published by Wiley in Starch - Stärke
- Vol. 67 (11-12) , 1061-1069
Abstract
Compatibility of poly(acrylic acid) (PAA) and corn starch blends was studied by various techniques. Blends were prepared by using solution mixing and casting method with the aid of glycerol as a plasticizer. The molecular level interactions between the blend components were analyzed with Fourier transform infrared spectroscopy (FTIR). Dynamic mechanical analysis (DMA) showed that the introduction of starch into PAA matrix contributed substantially to the increase of the storage modulus. Differential scanning calorimetry (DSC) studies revealed that the PAA/starch blends were partially miscible and had an amorphous structure. The thermal gravimetric analysis (TGA) confirmed that the blends had higher thermal stability than the individual polymers. Water uptake experiments showed that the degree of swelling was mainly dependent on the PAA content in the blend. X‐ray diffraction (XRD) studies showed that the incorporation of the PAA into starch destructed its crystalline structure. The morphology of the blends was changed by varying the composition. Scanning electron microscopic (SEM) analysis showed that at higher loads of starch, the PAA was formed as layers around starch granules. Blends containing higher amount of starch showed more homogenous and compatible behaviors relative to those with lower starch contents.Keywords
This publication has 46 references indexed in Scilit:
- Preparation method and physical, mechanical, thermal characterization of poly(vinyl alcohol)/poly(acrylic acid) blendsPolymer Bulletin, 2014
- Starch-based nano-biocompositesProgress in Polymer Science, 2013
- Comparative study on the blends of PBS/thermoplastic starch prepared from waxy and normal corn starchesStarch - Stärke, 2013
- Complexing blends of polyacrylic acid-polyethylene glycol and poly(ethylene-co-acrylic acid)-polyethylene glycol as shape stabilized phase change materialsEnergy Conversion and Management, 2012
- Preparation of poly(acrylic acid)–graphite oxide superabsorbent nanocompositesJournal of Materials Chemistry, 2012
- Water Soluble Polymers for Pharmaceutical ApplicationsPolymers, 2011
- Synthesis and characterization of corn starch based green composites reinforced with Saccharum spontaneum L graft copolymers prepared under micro-wave and their effect on thermal, physio-chemical and mechanical propertiesPolymer Degradation and Stability, 2010
- Property improvement of thermoplastic mung bean starch using cotton fiber and low‐density polyethyleneStarch - Stärke, 2010
- Formulation and Characterization of Biodegradable Packaging Film Derived from Potato Starch & LDPE Grafted with Maleic Anhydride—LDPE CompositionJournal of Polymers and the Environment, 2010
- Hydrophilic Films Based on Blends of Poly(acrylic acid) and Poly(2‐hydroxyethyl vinyl ether): Thermal, Mechanical, and Morphological CharacterizationMacromolecular Bioscience, 2003