Inner wall temperature distribution measurement of the ladle based on cavity effective emissivity correction
Authors:
Open Access
- 28 January 2022
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-10
Abstract
Inner wall temperature of ladle is closely related to the quality of steelmaking and control of steel-making tapping temperature. This article adopts a rotating platform to drive an infrared temperature sensor and a laser sensor to scan the temperature field distribution of the ladle inner wall at the hot repair station, where the scanning laser sensor obtains coordinates of each measured point. Because of measuring errors of infrared thermal radiation caused by emissivity uncertainty of the ladle inner wall surface, this article proposes a method for temperature measurement based on Monte Carlo model for effective emissivity correction of each measured point. In the model, we consider the ladle and fire baffle as a cavity. By calculation of the model, the effect of distance from the fire baffle to the ladle and the material surface emissivity of the ladle inner wall on the effective emissivity of the cavity are obtained. After that, the effective emissivity of each measured point is determined. Then the scanning temperature of each measured point is corrected to real temperature. By field measuring test and verification contrast, the results show that: the maximum absolute error of the method in this article is 4.7 °C, the minimum error is 0.6 °C, and the average error is less than 2.8 °C. The method in this article achieves high measurement accuracy and contributes to the control of metallurgical process based on temperature information.Keywords
All Related Versions
This publication has 13 references indexed in Scilit:
- Measurement the Thermal Profile of Steelmaking Ladle with Subsequent Evaluation the Reasons of Lining DamageArchives of Metallurgy and Materials, 2016
- Ladle metallurgy stainless steel slag as a raw material in Ordinary Portland Cement production: a possibility for industrial symbiosisJournal of Cleaner Production, 2016
- Measurements of Some Thermal Properties of Steel-Refractory Systems and Heat Losses from Steelmaking FurnacesTransactions of the Indian Institute of Metals, 2014
- Thermomechanical Behavior of Steel Ladle Linings and the Influence of InsulationsSteel Research International, 2013
- Definition of brightness temperature and restoration of true temperature in laser cladding using infrared cameraSurface and Coatings Technology, 2013
- Modern high-temperature thermal insulation for steel-pouring ladlesRefractories and Industrial Ceramics, 2012
- Effective emissivities of isothermal blackbody cavities calculated by the Monte Carlo method using the three-component bidirectional reflectance distribution function modelApplied Optics, 2012
- Calculation of effective emissivity of blackbody cavities by Monte-Carlo methodChinese Journal of Optics and Applied Optics, 2012
- Heat Transfer in Steelmaking LadleJournal of Iron and Steel Research International, 2008
- Radiation thermometry applied to temperature measurement in the cutting processMeasurement Science and Technology, 2007