A Die Pressing Test for the Estimation of Agglomerate Strength
Authors:
- 8 March 1994
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 77 (3) , 806-814
Abstract
A die pressing test was developed for quick and inexpensive estimation of the agglomerate strength of ceramic powders. The critical nominal pressure ( p c ) at which contact areas between agglomerates start to increase rapidly was found from the relationship between change in sample height and applied pressure in uniaxial single‐ended die pressing. A quantitative microscopic method was used for measuring the area fraction (Ψ) of agglomerates which transmits the force through the assembly. A die pressing agglomerate strength, σ d , is defined as σ d = 0.7 p c /Ψ. This strength was compared with the agglomerate tensile strength obtained from single agglomerate diametral compression tests and found to be 50% higher than the latter because of multipoint loading. A suggested guideline is that the mean agglomerate tensile strength is approximately 52% of p c determined in a die pressing test for spherical agglomerates. In addition to agglomerate tensile strength, the mean agglomerate size, the interior macropore structure of agglomerates, as well as the packing efficiencies between and inside agglomerates can be estimated by the procedure.Keywords
This publication has 17 references indexed in Scilit:
- Effect of Forming Pressure on the Internal Structure of Alumina Green Bodies Examined with Immersion Liquid TechniqueJournal of the American Ceramic Society, 1991
- Strengths of Green and Fired Spherical Aluminosilicate AggregatesJournal of the American Ceramic Society, 1987
- Generation of Powder Compaction Response DiagramsJournal of the American Ceramic Society, 1986
- Processing‐Related Fracture Origins: IV, Elimination of Voids Produced by Organic InclusionsJournal of the American Ceramic Society, 1986
- An improved split-cell apparatus for the measurement of tensile strength of powdersJournal of Physics E: Scientific Instruments, 1984
- Compaction Behavior of Spray‐Dried AluminaJournal of the American Ceramic Society, 1984
- Stress Transmission During the Compaction of a Spray‐Dried Alumina Powder in a Steel DieJournal of the American Ceramic Society, 1983
- Compaction of Aggregated Alumina PowderJournal of the American Ceramic Society, 1983
- The compaction process and deformability of granulesPowder Technology, 1982
- Some considerations on powder compression equationsPowder Technology, 1971