A Numerical Study of Swirl Blade Effects in Uphill Teeming Casting
Authors:
- 1 January 2010
- journal article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 50 (12) , 1756-1762
Abstract
The initial filling period during ingot casting was studied theoretically. The motivation was that it is crucial to achieve a preferred flow pattern which can lead to a smooth filling condition, particularly during the initial teeming stage. In this study, a twist-tape swirl blade was applied in a mathematical model to create a swirl flow in the inlet of the mold. The swirl blade was set vertically just beneath the inlet, which was made of a gradually divergent cross section area. The results showed that combinations of the inlet swirl flow and mold with gradually divergent bottom contributes to: i) Inlet flow passes along the wall of the mold, ii) the formation of a very uniform velocity distribution within only 6 s after the molten steel filled into the mold and iii) No formation of a hump on the free surface of the mold during the entire filling times. These phenomena will ensure that the mold flux is spread onto the surface of liquid steel evenly. Besides, the stable surface also prevents the mold flux from being dispersed into the molten steel.Keywords
This publication has 4 references indexed in Scilit:
- Effect of Nozzle Type and Swirl on Flow Pattern for Initial Filling Conditions in the Mould for Up-hill TeemingSteel Research International, 2007
- Development of Flow Field and Temperature Distribution during Changing Divergent Angle of the Nozzle When Using Swirl Flow in a Square Continuous Casting Billet MouldISIJ International, 2007
- Effect of Nozzle Swirl Blade on Flow Pattern in Runner during Uphill TeemingISIJ International, 2006
- Volume of fluid (VOF) method for the dynamics of free boundariesJournal of Computational Physics, 1981