Influence of Various Alloying Element Additions on Microstructure and Magnetic and Mechanical Properties and Corrosion Behavior of Cast Fe–Ga–Z Shape Memory Alloys
Open Access
- 8 November 2023
- journal article
- research article
- Published by Springer Nature in Metallography, Microstructure, and Analysis
- Vol. 12 (6) , 1009-1019
Abstract
Fe–Ga alloys are attractive materials where high mechanical strength, toughness, ductility, and large low-field magnetostriction combine to give unique properties. Adding alloying elements is an effective method to further enhance these properties. In order to integrate these alloys into the operating environments, e.g., micro-robots and magnetic actuators, the corrosion behavior should be addressed. This work analyzed the microstructure, magnetization, hardness, and corrosion properties of Fe81Ga19−xZx (X = 5 at.% of Ni, Mn, or Ti, and 2 at.% Al; separately) alloys. X-ray diffraction (XRD), scanning electron microscope-electron (SEM), vibrating sample magnetometer (VSM), Vickers hardness (HV), and a potentiostat were used for characterization. XRD revealed that the prominent peak belongs to the bcc disorder A2 phase and a small peak for the cubic order L12 phase. Fe–Ga–Al alloy got the maximum Ms value, while Fe–Ga–Mn alloy gained the lowest one. However, the Mr and Hc properties for Fe–Ga alloy were distinctly improved by adding Al but slightly affected by doping Mn. Addition of Ti achieved the highest hardness, followed by Ni, Mn, and Al. The microstructure of the different alloys significantly influenced their corrosion behavior. Fe–Ga–Mn alloy with the fine globular grain structure showed the lowest corrosion rate (C R = 0.03 mm/year), whereas Fe–Ga–Al alloy with the coarse longitudinal grains exhibited the highest corrosion rate (C R = 0.19 mm/year).Keywords
Funding Information
- Central Metallurgical Research and Development Institute
This publication has 26 references indexed in Scilit:
- Structure and magnetic properties of Fe-Ga alloys doped by TbJournal of Alloys and Compounds, 2018
- Assessment of Fe–Ga–B alloy magnetomechanical behaviorJournal of Materials Research, 2018
- Phase evolution and magnetic properties of DC sputtered Fe-Ga (Galfenol) thin films with growth temperaturesJournal of Alloys and Compounds, 2017
- Giant and reversible room-temperature elastocaloric effect in a single-crystalline Ni-Fe-Ga magnetic shape memory alloyScientific Reports, 2016
- Structure and anelasticity of Fe3Ga and Fe3(Ga,Al) type alloysJournal of Alloys and Compounds, 2015
- Study of Ordering and Properties in Fe-Ga Alloys With 18 and 21 at. pct GaMetallurgical and Materials Transactions A, 2015
- The structural and magnetic properties of rapidly solidified Fe100−xGax alloys, for 12.8≤x≤27.5Journal of Magnetism and Magnetic Materials, 2014
- A review of magnetostrictive iron–gallium alloysSmart Materials and Structures, 2011
- Corrosion studies of single crystals of iron–gallium alloys in aqueous environmentsCorrosion Science, 2007
- Detection and quantification of D03 chemical order in Fe–Ga alloys using high resolution X-ray diffractionMaterials Science and Engineering: A, 2006