Effects of Pores on Mechanical Properties of Plasma‐Sprayed Ceramic Coatings
Authors:
- 1 March 2000
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 83 (3) , 578-584
Abstract
The effects of pore sizes, shapes, and orientations on the mechanical properties of thermally sprayed ceramic coatings are investigated. The analysis is conducted using detailed finite‐element models with geometries similar to those of actual ceramic coatings containing many embedded pores. These microstructural models include many randomly placed pores of different sizes and shapes and are loaded in tension to determine their effective elastic moduli along the spray and transverse directions. We modeled coatings with statistical distributions of pore sizes and shapes that followed those of actual Al 2 O 3 –TiO 2 coatings. Because the pores in such a model are of different sizes and shapes, the model must be large enough to contain sufficient pores before the average modulus obtained from uniaxial loading can be identified as an effective property. Using differently sized models, we determined the variability of the average moduli. Such information is valuable when homogenized or continuum material models are used in the stress analyses of coatings. Our computed results show that a model must be large enough to contain 50–100 pores before the averaging of properties is accurate. Using the Al 2 O 3 –TiO 2 models, we also simulated microindentation tests. Unlike the results determined from uniaxial loading, the elastic moduli estimated from indentation possessed large variations. Apparently, the morphology of the pores immediately beneath the indentation or within the zone of influence has a significant effect on the response of the indenter and the measured modulus. The implications of these results and the computational capability to predict the mechanical properties of porous, plasma‐sprayed ceramic coatings are discussed here.Keywords
This publication has 17 references indexed in Scilit:
- Quantitative Evaluation of Void Distributions within a Plasma‐Sprayed CeramicJournal of the American Ceramic Society, 1999
- Elastic Response of Thermal Spray Deposits under Indentation TestsJournal of the American Ceramic Society, 1997
- Characterization of microstructural defects in plasma-sprayed thermal barrier coatingsJournal of Thermal Spray Technology, 1995
- Effects of vacuum plasma spray processing parameters on splat morphologyJournal of Thermal Spray Technology, 1995
- Modeling the deposition process of thermal barrier coatingsJournal of Thermal Spray Technology, 1995
- Effective Moduli of Solids With Cavities of Various ShapesApplied Mechanics Reviews, 1994
- Studies on ceramic coatings. Deduction of mechanical and thermal properties from the microstructure of the materialComputer Methods in Applied Mechanics and Engineering, 1994
- Measurement methods in surface engineeringSurface Engineering, 1993
- Effective Elastic Moduli of Ribbon-Reinforced CompositesJournal of Applied Mechanics, 1990
- Elastic moduli for a class of porous materialsActa Mechanica, 1989