Influence of Operating Parameters on Biomass Conversion under Sub‐ and Supercritical Water Conditions
- 2 February 2017
- journal article
- research article
- Published by Wiley in Chemical Engineering & Technology
- Vol. 40 (3) , 537-545
Abstract
The influence of reaction pressure, reaction time, reaction temperature, and biomass‐to‐water mass ratio R on the conversion of miscanthus biomass to biofuels under sub‐ and supercritical water (SCW) conditions was investigated. The highest total conversion was obtained under SCW conditions and the heating value increased under subcritical and SCW conditions. The findings herein show that near‐supercritical and supercritical water at 400 °C and high pressure can be an effective reaction medium for converting biomass to oils with relatively low oxygen contents in high yields.Keywords
This publication has 26 references indexed in Scilit:
- Hydrothermal liquefaction of biomass: A review of subcritical water technologiesEnergy, 2011
- A review on process conditions for optimum bio-oil yield in hydrothermal liquefaction of biomassRenewable and Sustainable Energy Reviews, 2011
- Effects of various solvents on the liquefaction of biomass to produce fuels and chemical feedstocksEnergy Conversion and Management, 2008
- Direct Liquefaction of BiomassChemical Engineering & Technology, 2008
- Conversion of secondary pulp/paper sludge powder to liquid oil products for energy recovery by direct liquefaction in hot-compressed waterWater Research, 2008
- Structural analysis of bio-oils from sub-and supercritical water liquefaction of woody biomassEnergy, 2007
- Delocalized organic pollutant destruction through a self-sustaining supercritical water oxidation processEnergy Conversion and Management, 2005
- Poplar wood–water slurry liquefaction in the presence of formic acid catalystEnergy Conversion and Management, 2004
- Experimental study on the direct liquefaction of Cunninghamia lanceolata in waterEnergy, 2003
- Hydrogen-donor solvents in biomass liquefactionIndustrial & Engineering Chemistry Process Design and Development, 1985