Heating and acid doping thin film carbon nanotube assemblies for high transparency and low sheet resistance
- 21 October 2010
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 21 (2) , 363-368
Abstract
Transparent electrodes made from metal oxides suffer from poor flexibility and durability. Highly transparent and electrically conductive thin films were assembled as a potential indium tin oxide (ITO) replacement using layer-by-layer (LbL) assembly of single-walled carbon nanotubes (SWNTs), stabilized with negatively charged deoxycholate (DOC), and positively charged poly(diallyldimethylammonium chloride) [PDDA]. Ellipsometry, quartz crystal microbalance, and UV-vis were used to measure the linear growth of these films as a function of the number of bilayers deposited, while TEM and SEM were used to visualize the morphology of these films. The PDDA/(SWNT + DOC) system produced transparent (>82% visible light transmittance) and electrically conductive (∼160 S cm−1) 20-bilayer films with a 38.4 nm thickness. Moreover, a series of post-treatments, involving heating and nitric acid doping, were used to increase conductivity to 1430 S cm−1 (Rs ≈ 300 Ω sq−1), with no change in transparency, owing to the removal of PDDA and the charge transfer doping. This study demonstrates high visible light transmittance and electrical conductivity of SWNT-based thin films, which are potentially useful as flexible transparent electrodes for a variety of optoelectronic applications.Keywords
This publication has 56 references indexed in Scilit:
- Durability under mechanical bending of the indium tin oxide films deposited on polymer substrate by thermionically enhanced sputteringOrganic Electronics, 2010
- Effect of deflection on the mechanical and optoelectronic properties of indium tin oxide films deposited on polyethylene terephthalate substrates by pulse magnetron sputteringThin Solid Films, 2009
- Layer-by-Layer Assembly of UV-Resistant Poly(3,4-ethylenedioxythiophene) Thin FilmsLangmuir, 2008
- A comparative study of electrode effects on the electrical and luminescent characteristics of Alq3/TPD OLED: Improvements due to conductive polymer (PEDOT) anodeJournal of Luminescence, 2007
- Research on the adhesive ability between ITO anode and PET substrate improved by polyimide buffer layerChinese Science Bulletin, 2005
- Mechanical integrity of transparent conductive oxide films for flexible polymer-based displaysThin Solid Films, 2004
- Transparent and conducting ITO films: new developments and applicationsThin Solid Films, 2002
- Strain-dependent electrical resistance of tin-doped indium oxide on polymer substratesApplied Physics Letters, 2000
- Transparent flexible organic light‐emitting devicesAdvanced Materials, 1997
- Electrical and optical properties of In2O3: Sn films prepared by activated reactive evaporationThin Solid Films, 1980