Evaluation of curing and physical properties of NR/SBR blends using radiation‐grafting copolymer
- 27 March 2009
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 30 (6) , 743-750
Abstract
The curing characterizations of natural rubber (NR) and styrene butadiene rubber (SBR) lattices and their blends with and without NR‐g‐MA and SBR‐g‐MA were studied by using oscillating disc rheometer methods. The minimum value for torque decreases with increasing NR in the blends and with the incorporation ofNR‐g‐MA and SBR‐g‐MA. The value of maximum torque increases with increasing of SBR in the blend and with the presence of (NR‐g‐MA and SBR‐g‐MA) is decreased. The mechanical properties of the samples were studied. The tensile strengths increased steadily with an increase of NR content in the blend. Thermal characteristics of these latex blends were studied by thermogravimetric analysis. Thermal degradation of these individual lattices and their blends were investigated with special reference to blend ratio and vulcanization techniques. As the SBR content in the blends increased their thermal stability was also found to increase. POLYM. COMPOS., 2009. © 2009 Society of Plastics EngineersKeywords
This publication has 22 references indexed in Scilit:
- The compatibilizing effect of maleic anhydride in ethylene-vinyl acetate (EVA)/ethylene-α-olefin copolymers blendsMacromolecular Research, 2005
- Blends of silicone rubber and liquid crystalline polymerMacromolecular Research, 2005
- Preparation and characterization of compatible thermoplastic starch/polyethylene blendsPolymer Degradation and Stability, 2005
- Melt grafting of maleic anhydride onto low-density polyethylene/polypropylene blendsPolymer Testing, 2003
- Rheological properties of maleated natural rubber and natural rubber blendsPolymer Testing, 2002
- Rheological and curing behavior of reactive blending. I. Maleated natural rubber–cassava starchJournal of Applied Polymer Science, 2001
- In situ compatibilization of polyamide 6/natural rubber blends with maleic anhydridePolymer, 2000
- Dielectric properties of isotactic polypropylene/nitrile rubber blends: Effects of blend ratio, filler addition, and dynamic vulcanizationJournal of Applied Polymer Science, 1999
- Flame retardant properties of binary blends: a comparison of miscible and immiscible blendsPolymer Degradation and Stability, 1997
- Studies of electrical properties of some fire-retarding poly(vinyl chloride) compositionsJournal of Applied Polymer Science, 1997