Toughening mechanism of PPS/Sr ferrite composites by TPU elastomer
Authors:
- 15 March 2016
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 133 (25)
Abstract
In order to improve the impact strength of PPS‐based strontium ferrite composite, the thermoplastic polyurethane (TPU) elastomer was added in the composite as a toughening agent. The composites were obtained by melt‐blending PPS, TPU and strontium ferrites in twin‐screw extruder. The crystalline state, thermal property, surface morphology and impact strength of the composites were investigated by using X‐ray diffraction, differential scanning calorimetry, thermoravimetric analysis, scanning electron microscope and izod impact test. The addition of TPU improves impact strength of PPS‐based strontium ferrite composite. When the addition of TPU increases to 11wt %, the impact strength of Sr‐ferrite/PPS/TPU composite is enhanced by 51.44% compared with the sample without TPU addition, and reaches to 5.77 kJ/m2. The occurrence of bonding interaction between PPS and TPU, demonstrated by a series of experiments, changes the structure and impact properties of PPS. Based on the experimental results, a possible mechanism is proposed to explain the improvement of Sr‐ferrite/PPS/TPU composites, which is different from the conventional toughening mechanism by the conformation of elastomers and the suppression of microcracks propagation. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43564.Keywords
This publication has 23 references indexed in Scilit:
- Research progress in toughening modification of poly(lactic acid)Journal of Polymer Science Part B: Polymer Physics, 2011
- Melt Crystallization and Morphology of Poly(p‐phenylene sulfide) under High PressureMacromolecular Chemistry and Physics, 2007
- Toughening mechanism of PA1010/ester-based TPU blendsMaterials Letters, 2007
- Interfacial reaction and its influence on phase morphology and impact properties of modified-polyacetal/thermoplastic polyurethane blendsJournal of Applied Polymer Science, 2006
- Study on thermoplastic polyurethane/polypropylene (TPU/PP) blend as a blood bag materialJournal of Applied Polymer Science, 2003
- Mechanical properties of thermoplastic polyurethanes containing aliphatic polycarbonate soft segments with different chemical structuresPolymer Engineering & Science, 2002
- Impact modification of polyacetal by thermoplastic elastomer polyurethaneJournal of Applied Polymer Science, 2002
- Time-Resolved FTIR Study of Crystallization Behavior of Melt-Crystallized Poly(Phenylene Sulfide)Journal of Macromolecular Science, Part B, 2000
- Elastomer Toughening of Poly(phenylene sulfide).KOBUNSHI RONBUNSHU, 1999
- Toughened plastics consisting of brittle particles and ductile matrixPolymer Engineering & Science, 1985