Dual‐band single‐layer quarter ring frequency selective surface for Wi‐Fi applications
Open Access
- 1 March 2016
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 10 (4) , 435-441
Abstract
This study proposes a frequency selective surface (FSS) design to be used in Wi‐Fi shielding applications as either a band reject or band pass dual‐band single‐layer filter. The proposed design consists of a combination of basic elements, that is, ring loops/slots, and is tuned at both 2.4 and 5.2 GHz Wi‐Fi frequency bands. It has a relatively stable frequency response in the aforementioned Wi‐Fi bands for incidence angles ranging from 0° to 45°. Both band reject and band pass designs are presented, along with their unit cell dimensions. Simulation and model validation through measurements demonstrate the performance of the proposed FSS design. Active variants are also proposed and briefly evaluated, in simulation environment, which should allow for applications where an on–off switching is desired at 2.4 and 5.2 GHz Wi‐Fi bands.Keywords
Funding Information
- Fundação para a Ciência e a Tecnologia
- Ministerio de Economía y Competitividad
- Secretaría de Estado de Investigacion, Desarrollo e Innovacion (TEC2014‐55735‐C03‐3R)
This publication has 16 references indexed in Scilit:
- Miniaturized dual-band loaded frequency selective surface with narrow band spacing2012
- Indoor band pass frequency selective wall paper Equivalent Circuit & ways to enhance wireless signal2011
- Design of RF/Microwave efficient buildings using frequency selective surface2011
- Transmission improvement of UMTS and Wi-Fi signals through energy saving glass using FSS2011
- Cross-Dipole Bandpass Frequency Selective Surface for Energy-Saving Glass Used in BuildingsIEEE Transactions on Antennas and Propagation, 2010
- A Hybrid Model for Radio Wave Propagation Through Frequency Selective Structures (FSS)IEEE Transactions on Antennas and Propagation, 2010
- A Frequency Selective Surface With Miniaturized ElementsIEEE Transactions on Antennas and Propagation, 2007
- A Frequency-Selective Wall for Interference Reduction in Wireless Indoor EnvironmentsIEEE Antennas and Propagation Magazine, 2006
- Frequency Selective Surfaces2000
- Single‐screen triband fss with double‐square‐loop elementsMicrowave and Optical Technology Letters, 1992