Enhanced compatibility, morphology, rheological and mechanical properties of carboxylated acrylonitrile butadiene rubber/chloroprene rubber/graphene nanocomposites: effect of compatibilizer and graphene content
Open Access
- 23 March 2020
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (20) , 11777-11790
Abstract
Elastomeric nanocomposites were prepared from carboxylated acrylonitrile butadiene rubber/chloroprene rubber (XNBR/CR), graphene and a glycidyl methacrylate (GMA)-grafted XNBR (XNBR-g-GMA) compatibilizer by using a two-roll mill. The effect of graphene and XNBR-g-GMA compatibilizer on curing characteristics, rheological and mechanical properties and morphology of the nanocomposites was investigated. The curing properties and the morphology of the nanocomposites were studied by rheometry, SEM and TEM, respectively. The results of rheometry showed that by adding the XNBR-g-GMA compatibilizer and increasing the graphene content, the scorch time and optimum curing time decreased, but the torque increased, while the curing time increased with increasing CR percentage in the blend. Also, the results of DMTA tests showed that by adding the XNBR-g-GMA compatibilizer, there was compatibility between CR and XNBR and the dispersion of graphene in the XNBR/CR matrix was improved. This phenomenon was confirmed by direct observation of exfoliated graphene nanosheets by TEM. Also, the addition of XNBR-g-GMA and the increase of graphene content in the XNBR/CR matrix caused the fracture surface of the samples to be roughened and the size of dispersed phase (CR) in the XNBR matrix becomes smaller. The results of mechanical properties showed that the addition of the XNBR-g-GMA and increasing the graphene content resulted in increased hardness, fatigue strength, tensile strength, modulus and elongation-at-break.Keywords
This publication has 44 references indexed in Scilit:
- Vulcanization kinetics of graphene/natural rubber nanocompositesPolymer, 2013
- Temperature-dependent compatibilizing effect of graphene oxide as a compatibilizer for immiscible polymer blendsRSC Advances, 2013
- Chemical modification of graphene with a thermotropic liquid crystalline polymer and its reinforcement effect in the polymer matrixPolymer Chemistry, 2013
- Load transfer and mechanical properties of chemically reduced graphene reinforcements in polymer compositesNanotechnology, 2012
- The mechanics of graphene nanocomposites: A reviewComposites Science and Technology, 2012
- Polypropylene-grafted graphene oxide sheets as multifunctional compatibilizers for polyolefin-based polymer blendsJournal of Materials Chemistry, 2012
- A review on the Mullins effectEuropean Polymer Journal, 2009
- Nanocomposites based on chloroprene rubber: Effect of chemical nature and organic modification of nanoclay on the vulcanizate propertiesEuropean Polymer Journal, 2008
- Network structure and mechanical properties of sulfur-cured rubbersMacromolecules, 1994
- Dynamic Testing and Reinforcement of RubberRubber Chemistry and Technology, 1988