A Fully Integrated CMOS 0.3 V 335 nW PWM-Based Light-to-Digital Converter for Optoelectronic Sensing Systems in Biomedical Applications
Open Access
- 1 February 2025
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Letters
- Vol. 9 (2) , 1-4
Abstract
This letter reports on the design of a novel, fully integrated stand-alone light-to-digital converter (LDC) for optoelectronic sensors in wearable/implantable biomedical applications. The architecture designed in TSMC 180 nm standard Si CMOS technology integrates a Si photodiode (PD), a ring oscillator, two digital counters, and a voltage-to-pulsewidth modulation (PWM) stage as the basic block of the light-to-digital converter in a Si area of 0.018 mm2. The modulation stage, composed of ten transistors and a capacitor, provides a square waveform whose pulse width varies as a function of its input voltage provided by the Si photodiode operating in a photovoltaic mode that linearly depends on the light intensity impinging on its sensitive area. The value of the pulse width is digitalized by two digital counters driven by the ring oscillator. The complete system, powered at 0.3 V, has been fully characterized by postlayout simulations demonstrating an overall sensitivity of 0.062 LSB/lx, a power consumption of 335 nW, and a sample rate of 3 kS/s. A comparison with similar solutions in the literature shows that the proposed system achieves the best performance in power consumption, Si area, and supply voltage with a good sample rate value.Keywords
This publication has 25 references indexed in Scilit:
- An optrode array for spatiotemporally-precise large-scale optogenetic stimulation of deep cortical layers in non-human primatesCommunications Biology, 2024
- State-of-the-Art Light to Digital Converter Circuits Applicable in Non-Invasive Health Monitoring Devices to Combat COVID-19 and Other Respiratory Illnesses: A ReviewIEEE Sensors Journal, 2022
- Recent advancements in optical biosensors for cancer detectionBiosensors and Bioelectronics, 2022
- Optical biosensors - Illuminating the path to personalized drug dosingBiosensors and Bioelectronics, 2021
- Optical sensors for continuous glucose monitoringProgress in Biomedical Engineering, 2021
- Low-Power High-Sensitivity Photoplethysmography Sensor for Wearable Health Monitoring SystemIEEE Sensors Journal, 2021
- 28.3 A 28μW 134dB DR 2 nd -Order Noise-Shaping Slope Light-to-Digital Converter for Chest PPG Monitoring2021
- Wearable Multiple Modality Bio-Signal Recording and Processing on Chip: A ReviewIEEE Sensors Journal, 2021
- Fully Synthesizable Low-Area Analogue-to-Digital Converters With Minimal Design Effort Based on the Dyadic Digital Pulse ModulationIEEE Access, 2020
- A 0.35μm CMOS UWB-Inspired Bidirectional Communication System-on-Chip for Transcutaneous Optical Biotelemetry Links2019