Nanoscale patterning of Ru. II. Anisotropy and selectivity
- 3 November 2026
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (6)
Abstract
A cyclic process consisting of plasma nitridation, hydrogen plasma reduction, and etching by oxygen plasma was developed, achieving an etch rate of 3.6 or 0.2 nm per cycle, with and without ions, respectively (Part I). In this work, the ion-dependent etch was confirmed from etching nanoscale patterned ruthenium samples. Oxygen plasma produced an etch profile with undercut and an etch anisotropy of 4 and a selectivity of 27 with respect to the hard mask, SiO2. The N2/O2 cyclic process increased the anisotropy to 10, but the etch profile was slightly tapered due to passivation by RuN. The N2/H2/O2 cyclic process maintained an anisotropy of 10 and achieved more vertical etched profiles with no redeposition on the hard mask sidewalls and a selectivity of 16. On features with a pitch as low as 35 nm, the cyclic process resulted in an anisotropic etch profile and less aspect ratio dependence while maintaining a high selectivity versus the hard mask.Keywords
Funding Information
- Samsung (ISR202191146)
This publication has 31 references indexed in Scilit:
- Advanced Fabrication of Ultrathin Ruthenium Films Using Synergistic Atomic Layer Deposition and EtchingSmall Methods, 2025
- Plasma-assisted oxide removal from ruthenium-coated EUV opticsJournal of Applied Physics, 2018
- Comparison of Langmuir probe and multipole resonance probe measurements in argon, hydrogen, nitrogen, and oxygen mixtures in a double ICP dischargeJournal of Applied Physics, 2017
- Ion Energy and Angular Distribution in Biased Inductively Coupled Ar/O2 Discharges by Using a Hybrid ModelPlasma Processes and Polymers, 2017
- On the synthesis and thermal stability of RuN, an uncommon nitrideSurface and Coatings Technology, 2016
- Near room temperature plasma enhanced atomic layer deposition of ruthenium using the RuO 4 -precursor and H 2 -plasmaJournal of Materials Chemistry C, 2015
- Synthesis of cubic ruthenium nitride by reactive pulsed laser ablationJournal of Physics and Chemistry of Solids, 2007
- Patterning of Ru electrode in O2/Cl2 gas using reactive ion etcherVacuum, 2003
- Experimental and simulated STM images of stoichiometric and partially reduced RuO2() surfaces including adsorbatesSurface Science, 2002
- Plasma sputtering of silicon dioxide substrate by low energy Ar ion bombardment: molecular dynamics simulationJournal of Crystal Growth, 2002