The Strain Evolution and Fracture of GH3535 Alloy Welded Joint Characterized by DIC at Different Temperatures
Open Access
Abstract
Welding is widely employed in manufacturing processes, with the mechanical properties of welded joints being a primary focus of welding technology research. However, distinct regions of welded joints—including the base metal (BM), heat-affected zone (HAZ), and deposited metal (DM)—exhibit divergent deformation behaviors, which collectively influence the fracture behavior of the joints. In this study, the specific locations of strain concentration and fracture in GH3535 alloy welded joints (fabricated using ERNiMo-2 welding wire) were investigated during tensile tests at room temperature (RT) and 700 °C. Characterizations were performed via digital image correlation (DIC), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM). Results revealed that during RT tension, strain was concentrated in the deposited metal adjacent to the fusion line (FL) which is 200% higher than BM, where cracks also initiated. At 700 °C, strain was mainly concentrated in the deposited metal, where the maximum strain concentration was approximately three times that in the base metal, and fracture also occurred in this region. It has been confirmed through in-suit observations that during high-temperature deformation, the deposited metal of the GH3535 alloy is more prone to strain concentration and simultaneously exhibits lower plasticity. This study advances the understanding of the deformation behavior of GH3535 alloy welded joints through in-suit observation results, and indicates that strengthening the deposited metal (i.e., the region more prone to strain concentration) is a more effective approach to improve the mechanical properties of such welded joints.Keywords
Funding Information
- National Natural Science Foundation of China (52301026, U2032205, 52171023)
- China Postdoctoral Science Foundation (2023M743660)
- Shanghai Outstanding Academic Leaders Plan (21XD1404300)
This publication has 23 references indexed in Scilit:
- Grain refinement of dual phase steel maximizes deformation ability of martensite, leading to simultaneous enhancement of strength and ductilityActa Materialia, 2025
- Effect of long-term thermal exposure on microstructure of laser-welded UNS N10003 alloyNuclear Science and Techniques, 2024
- The influence of Si content on precipitation behavior and high-temperature mechanical stability in ERNiMo-2 deposited metalJournal of Materials Science, 2024
- Analysis of burnup performance and temperature coefficient for a small modular molten-salt reactor started with plutoniumNuclear Science and Techniques, 2023
- Absorption effect of pure nickel on the corrosion behaviors of the GH3535 alloy in tellurium vaporNuclear Science and Techniques, 2021
- New non-contact measurement method of deformation at tensile test of thin film via digital image correlation techniqueInternational Journal of Precision Engineering and Manufacturing, 2017
- Recent Advances and Perspectives in Digital Image CorrelationExperimental Mechanics, 2015
- The Effect of Long-Term Thermal Exposure on the Microstructure and Stress Rupture Property of a Directionally Solidified Ni-Based SuperalloyMetallurgical and Materials Transactions A, 2014
- An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless SteelMetallurgical and Materials Transactions A, 2014
- Softening Kinetics in the Subcritical Heat-Affected Zone of Dual-Phase Steel WeldsMetallurgical and Materials Transactions A, 2010