A general approach to calculate the stiffness tensor of short‐fiber composites using the fabric tensor determined by X‐ray computed tomography
- 15 November 2022
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 44 (2) , 917-931
Abstract
In this work, a general method to predict the stiffness tensor of short‐fiber composites as a function of the fabric tensor (i.e. the tensor describing the architectural anisotropy of the micro‐structure), determined by X‐ray computed tomography, is presented. The proposed method does not depend on the type of fabric tensor used to characterize the symmetry properties of the composite. The experimental data used for method validation were obtained from thermoplastic composite matrices reinforced with short carbon and basalt fibers. The components of the stiffness tensor were calculated using the Mori‐Tanaka model and the Halpin‐Tsai equation for the stiffness of aligned short‐fiber composites, but other micromechanics models could be used as well. The statistical alignment of the fibers in each portion of the sample was measured by determining the principal axes of the fabric tensor. The average properties calculated on sub‐volumes provided moduli values in very good agreement with those determined experimentally. This approach is very general and easy to implement and does not need any numerical analysis tools.Keywords
This publication has 42 references indexed in Scilit:
- Local anisotropy analysis of injection moulded fibre reinforced polymer compositesComposites Science and Technology, 2008
- Stiffness predictions for unidirectional short-fiber composites: Review and evaluationComposites Science and Technology, 1999
- Elastic moduli and thermal conductivity of injection‐molded short‐fiber–reinforced thermoplasticsPolymer Composites, 1992
- Simultaneous determination of composition and thickness of thin films by x-ray microanalysis at 300 kV and Monte Carlo simulationUltramicroscopy, 1990
- Estimation of structural anisotropy based on volume orientation. A new conceptJournal of Microscopy, 1990
- Wolff’s Law of Trabecular Architecture at Remodeling EquilibriumJournal of Biomechanical Engineering, 1986
- The effect of aspect ratio of inclusions on the elastic properties of unidirectionally aligned compositesPolymer Composites, 1984
- A Self-Consistent Approach to the Elastic Stiffness of Short-Fiber CompositesJournal of Composite Materials, 1980
- The effect of fibre length on the overall moduli of composite materialsJournal of the Mechanics and Physics of Solids, 1979
- The Halpin‐Tsai equations: A reviewPolymer Engineering & Science, 1976