State-of-the-Art of Establishing Test Procedures for Real Driving Gaseous Emissions from Light- and Heavy-Duty Vehicles
Authors:
- S. M. Ashrafur RahmanS. M. Ashrafur Rahman
- I. M. Rizwanul FattahI. M. Rizwanul Fattah
- Hwai Chyuan OngHwai Chyuan Ong
- Fajle Rabbi AshikFAFajle Rabbi Ashik
- Mohammad Mahmudul HassanMHMohammad Mahmudul Hassan
- Tausif MurshedTMTausif Murshed
- Ashraful ImranAIAshraful Imran
- Hamidur RahmanHRHamidur Rahman
- Akibur RahmanAkibur Rahman
- Mohammad Al Mahdi HasanMHMohammad Al Mahdi Hasan
- T. M. Indra MahliaT. M. Indra Mahlia
Open Access
Abstract
Air pollution caused by vehicle emissions has raised serious public health concerns. Vehicle emissions generally depend on many factors, such as the nature of the vehicle, driving style, traffic conditions, emission control technologies, and operational conditions. Concerns about the certification cycles used by various regulatory authorities are growing due to the difference in emission during certification procedure and Real Driving Emissions (RDE). Under laboratory conditions, certification tests are performed in a ‘chassis dynamometer’ for light-duty vehicles (LDVs) and an ‘engine dynamometer’ for heavy-duty vehicles (HDVs). As a result, the test drive cycles used to measure the automotive emissions do not correctly reflect the vehicle’s real-world driving pattern. Consequently, the RDE regulation is being phased in to reduce the disparity between type approval and vehicle’s real-world emissions. According to this review, different variables such as traffic signals, driving dynamics, congestions, altitude, ambient temperature, and so on have a major influence on actual driving pollution. Aside from that, cold-start and hot-start have been shown to have an effect on on-road pollution. Contrary to common opinion, new technology such as start-stop systems boost automotive emissions rather than decreasing them owing to unfavourable conditions from the point of view of exhaust emissions and exhaust after-treatment systems. In addition, the driving dynamics are not represented in the current laboratory-based test procedures. As a result, it is critical to establish an on-road testing protocol to obtain a true representation of vehicular emissions and reduce emissions to a standard level. The incorporation of RDE clauses into certification procedures would have a positive impact on global air quality.Keywords
This publication has 96 references indexed in Scilit:
- Impact of COVID-19 on the social, economic, environmental and energy domains: Lessons learnt from a global pandemicSustainable Production and Consumption, 2021
- Environmental determinants of cardiovascular disease: lessons learned from air pollutionNature Reviews Cardiology, 2020
- The short-term effects of air pollutants on hospitalizations for respiratory disease in Hefei, ChinaInternational Journal of Biometeorology, 2019
- Comparison of Data Analysis Methods for European Real Driving Emissions RegulationSAE International Journal of Advances and Current Practices in Mobility, 2017
- Time Resolved Measurements of Speciated Tailpipe Emissions from Motor Vehicles: Trends with Emission Control Technology, Cold Start Effects, and SpeciationEnvironmental Science & Technology, 2016
- Road vehicle emission factors development: A reviewAtmospheric Environment, 2013
- Flow improvements and vehicle emissions: Effects of trip generation and emission control technologyTransportation Research Part D: Transport and Environment, 2006
- Driving style and traffic measures-influence on vehicle emissions and fuel consumptionProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2004
- Automotive test drive cycles for emission measurement and real-world emission levels-a reviewProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2002
- Vehicle emissions in relation to fuel compositionScience of The Total Environment, 1995