Wear Behavior of Commercial Copper-Based Aircraft Brake Pads Fabricated under Different SPS Conditions
Open Access
Abstract
Understanding the wear behavior of Cu-based brake pads, which are used in high-speed railway trains and aircraft, is essential for improving their design and safety. Therefore, the wear mechanism of these pads has been studied extensively. However, most studies have focused on the changes in their composition and not the effects of their manufacturing conditions. In this study, we fabricated commercial Cu-based brake pads containing Fe, graphite, Al2O3, and SiO2 using spark plasma sintering under different conditions. The microstructures and mechanical properties of the pads were investigated. The pads were tribo-evaluated using the ball-on-disc test under various load conditions. Their worn surfaces were analyzed using X-ray diffraction analysis, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and confocal microscopy in order to elucidate their wear mechanism. In addition, the dynamometer test was performed to confirm whether their wear behavior would be similar under actual conditions. Finally, a comparative analysis was performed using the ball-on-disc test. The results indicated that the brake pads with the same composition but fabricated under different sintering conditions exhibited different wear characteristics. We believe that this research is of great significance for understanding the wear mechanism of Cu-based brake pads and improving their design and hence their performance.Keywords
Funding Information
- Korea Institute of Construction and Transportation Technology Evaluation and Planning (21RSCD-A156406-02)
- Korea Evaluation Institute of Industrial Technology (1415168877)
This publication has 39 references indexed in Scilit:
- The tribological properties and mechanism of wear of Cu-based sintered powder materials containing molybdenum disulfide and molybdenum diselenite under unlubricated sliding against copperWear, 2012
- The effect of sintering temperature on some properties of Cu–SiC compositeJournal of Alloys and Compounds, 2011
- On the role of copper in brake friction materialsTribology International, 2010
- Wear mechanism in automotive brake materials, wear debris and its potential environmental impactWear, 2009
- Microstructure, mechanical properties, electrical conductivity and wear behavior of high volume TiC reinforced Cu-matrix compositesMaterials Characterization, 2009
- Tribological properties of solid lubricants (graphite, h-BN) for Cu-based P/M friction compositesTribology International, 2008
- Friction and wear behaviors and mechanisms of Fe and SiO2 in Cu-based P/M friction materialsWear, 2007
- Tribological behavior of Al–Si–SiCp composites/automobile brake pad system under dry sliding conditionsTribology International, 2007
- Some mechanisms of tribofilm formation in metal/metal and ceramic/metal sliding interactionsWear, 2000
- Wear mechanism in graphite–copper electrical sliding contactWear, 1999