Micromechanical studies on binary and ternary blends of polyethylene, polypropylene, and polyamide 66: Influence of the compatibilizer
- 1 January 2003
- journal article
- research article
- Published by Taylor & Francis in International Journal of Polymeric Materials and Polymeric Biomaterials
- Vol. 52 (10) , 939-956
Abstract
The microhardness H of PE/PP/PA blends prepared by one-Step and two-step mixing processes was determined. The microhardness of the blends was markedly affected by the composition. Results reveal that the presence of compatibilizers induces a remarkable decrease in the H of the blends. It is shown that the large deviation of H from the additivity law of the single components is mainly due to the depression of the crystal hardness values of polymer crystals. However, the decrease in crystallinity of the individual components in each blend also has to be considered. Comparison of experimental and calculated H data and analysis of DSC results in all the blends suggest that the surface free energy of the crystals increases as a consequence of the blending process. Results are discussed in light ofthe changes occurring in the defective boundary surface of the crystals. Finally, a linear relationship between the hardness H and the yield stress σ y , as well as between H and the Young's modulus E, are found. The deviation of the H/ σ y and the H/E ratios from the theoretical predictions are discussed in the light of the strain rate used and the compatibilizer effects on the blend structural properties.Keywords
This publication has 26 references indexed in Scilit:
- Relation of chain constitution with phase structure in blends: compatibility of two phases in blends of polyamide with low-density polyethylene and its ionomersJournal of Applied Polymer Science, 2000
- Preparation of functionalised low-density polyethylene by reactive extrusion and its blend with polyamide 6Polymer, 2000
- Effect of the mixing procedure on the morphology and properties of compatibilized polypropylene/polyamide blendsPolymer, 1998
- Microhardness of condensation polymers and copolymers. 2. Poly(ester ether carbonate) thermoplastic terpolymersJournal of Macromolecular Science, Part B, 1998
- Studies on fracture behavior of tough PA6/PP blendsJournal of Applied Polymer Science, 1997
- Novel aspects of microstructure of liquid crystalline copolyesters as studied by microhardness: influence of composition and temperaturePolymer, 1997
- Microstructure and mechanical properties of PBT-PCcblock copolymers: Influence of composition, structure, and physical agingJournal of Macromolecular Science, Part B, 1997
- Functionalized elastomeric compatibilizer in PA 6/PP blends and binary interactions between compatibilizer and polymerPolymer Engineering & Science, 1994
- Mechanical properties and structure of glassy and semicrystalline random copolymers of poly(ethylene terephthalate) and poly(ethylene naphthalene-2,6-dicarboxilate)Journal of Materials Science, 1992
- Microstructural changes in polyethylene-polypropylene blends as revealed by microhardnessJournal of Materials Science, 1988