Numerical analysis of the blade tip-timing signal of a fiber bundle sensor probe
Authors:
- 1 March 2015
- journal article
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 54 (3) , 034103
Abstract
Blade tip-timing is the most effective method for online blade vibration measurement of large rotating machines like turbine engines. Fiber bundle sensors are utilized in tip-timing system to measure the arrival time of the blade. The model of the tip-timing signal of the fiber bundle sensor is established. Experiments are conducted and the results are in concordance with the model established. The rising speed of the tip-timing signal is analyzed. To minimize the tip-timing error, the effects of the clearance change between the sensor and the blade and the deflection of the tip surface are analyzed. Simulation results indicate that the variable gain amplifier, which amplifies the signals to a similar level, can eliminate the measurement error caused by the variation of the clearance between the sensor and blade. Increasing the clearance between the sensor and blade can reduce the measurement error introduced by deflection of the tip surface.Keywords
Funding Information
- Changjiang Scholar Program, Ministry of Education (20130032110054)
- Doctoral Fund of Ministry of Education of China (20130032110054)
- Doctoral Scientific Fund Project of the Ministry of Education of China (20130032110054)
This publication has 9 references indexed in Scilit:
- Vibration based damage detection of rotor blades in a gas turbine engineEngineering Failure Analysis, 2014
- An Optical Fiber Bundle Sensor for Tip Clearance and Tip Timing Measurements in a Turbine RigSensors, 2013
- Blade tip timing and strain gauge correlation on compressor bladesProceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2008
- A Class of Methods for the Analysis of Blade Tip Timing Data from Bladed Assemblies Undergoing Simultaneous Resonances—Part I: Theoretical DevelopmentInternational Journal of Rotating Machinery, 2007
- Monitoring low cycle fatigue damage in turbine blade using vibration characteristicsMechanical Systems and Signal Processing, 2007
- Tubomachinery blade vibration amplitude measurement through tip timing with capacitance tip clearance probesSensors and Actuators A: Physical, 2005
- BLADE-TIP TIMING MEASUREMENT OF SYNCHRONOUS VIBRATIONS OF ROTATING BLADED ASSEMBLIESMechanical Systems and Signal Processing, 2002
- A Survey of Blade Tip-Timing Measurement Techniques for Turbomachinery VibrationJournal of Engineering for Gas Turbines and Power, 1998
- A theoretical analysis of the bifurcated fiber bundle displacement sensorIEEE Transactions on Instrumentation and Measurement, 1998