Chemical treatment of banana tree pseudostem particles aiming the production of particleboards
Open Access
- 1 February 2014
- journal article
- Published by FapUNIFESP (SciELO) in Ciência E Agrotecnologia
- Vol. 38 (1) , 43-49
Abstract
Brazil is one of the major banana producers in the world, and consequently generates a great amount of residues from this crop, which could be utilized in particleboard production. The present work aimed to evaluate the effect of different chemical treatments of the particles of Musa sp. pseudostem, on their chemical and physical properties (basic density), and on the physical and mechanical properties of the particleboards produced with the same material. Five treatments were applied to the particles: 1) without treatment (control); 2) 2% acetic acid; 3) 0.5% NaOH; 4) acetone (1/1 in volume/volume); and 5) water. Panels with medium density were produced (0.70 g/cm³), bonded with 12% (in relation to the particle mass) of urea-formaldehyde adhesive. The pressing cycle was conducted at 160º C, under 4 MPa, during 8 min. The results obtained indicated that the chemical treatments performed in the particles of banana tree pseudostem affected their chemical composition. The basic density of the particles was 0.10 g/cm³, and only the NaOH treatment led to its increase for values around 0.13 g/cm3. The panels produced with particles without treatment (control) and particles treated with acetic acid presented the lowest values of water absorption and thickness swelling after 2 and 24 h of immersion. Mechanical properties of all the panels produced were below the minimum recommended by the standard CS 236-66 (COMMERCIAL STANDARD - CS, 1968).Keywords
This publication has 10 references indexed in Scilit:
- Hybrid chipboard panels based on sugarcane bagasse, urea formaldehyde and melamine formaldehyde resinIndustrial Crops and Products, 2011
- Recent developments in chemical modification and characterization of natural fiber‐reinforced compositesPolymer Composites, 2007
- Propriedades de chapas de aglomerado confeccionadas com misturas de partículas de Eucalyptus spp e Pinus elliottiiRevista Árvore, 2007
- Propriedades de chapas tipo OSB, fabricadas com partículas acetiladas de madeiras de Eucalyptus grandis, Eucalyptus urophylla, Eucalyptus cloeziana e Pinus elliottiiRevista Árvore, 2006
- Detection in situ and characterization of lignin in the G -layer of tension wood fibres of Populus deltoidesPlanta, 2004
- New low-cost insulation particleboards from mixture of durian peel and coconut coirBuilding and Environment, 2004
- Utilization of banana waste for the production of lignolytic and cellulolytic enzymes by solid substrate fermentation using two Pleurotus species (P. ostreatus and P. sajor-caju)Process Biochemistry, 2003
- Viabilidade do aproveitamento de resíduos de fibras vegetais para fins de obtenção de material de construçãoRevista Brasileira de Engenharia Agrícola E Ambiental, 2000
- Influence of Degree of Polymerization of Cellulose and Hemicellulose on Strength Loss in Fire-Retardant-Treated Southern PineHolzforschung, 1999
- Características tecnológicas dos caules de juta visando à produção de pastas celulósicas para papelBragantia, 1986