Development of Embedded Heatsinking Layers for Compact Arrays of X-Ray TES Microcalorimeters
Authors:
- 22 November 2010
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 21 (3) , 223-226
Abstract
Transition-edge sensor microcalorimeter arrays in compact geometries and large formats experience local heating from bias power and x-ray hits that must be dissipated in the frame. For devices on solid, non-perforated silicon substrates, we have introduced an underlying embedded copper heatsinking layer to enhance the ability of the frame to remove this heat. In particular, such a layer can mitigate thermal crosstalk between nearby pixels within the array. Further improvements in array performance, such as decreased magnetic field sensitivity and stray inductance, are possible by turning the heatsinking layer into a superconducting ground plane. In this presentation, we report on the development of heatsinking layers consisting of a 1-2 μm thick high-quality copper layer which is sandwiched between two thin refractory metal-based diffusion barriers. These diffusion barriers are designed to avoid copper migration into the surrounding material over time, especially during our high temperature TES fabrication process which takes place in excess of 400°C . A 0.3-0.5 μm thick PECVD SiO2 cover layer isolates the heatsinking layer from the detector circuit. We present first results on our attempt to tailor the materials forming the diffusion barrier to fabricate both well defined superconducting ground planes and non-superconducting layers with the desired barrier characteristics.Keywords
This publication has 9 references indexed in Scilit:
- High-spectral resolution high-cadence imaging x-ray microcalorimeters for solar physics2010
- Optimizing Transition-Edge Sensor Design for High Count-Rate Applications2009
- Heat Sinking, Crosstalk, and Temperature Uniformity for Large Close-Packed Microcalorimeter ArraysIEEE Transactions on Applied Superconductivity, 2009
- Multiplexed readout of uniform arrays of TES x-ray microcalorimeters suitable for Constellation-X2008
- Thermal stability of Ti/Mo and Ti/MoN nanostructures for barrier applications in Cu interconnectsNanotechnology, 2008
- Materials Development for Auxiliary Components for Large Compact Mo/Au TES ArraysJournal of Low Temperature Physics, 2008
- Prospective development in diffusion barrier layers for copper metallization in LSIMicroelectronics Journal, 2007
- A Through-Wafer Interconnect in Silicon for RFICsIEEE Transactions on Electron Devices, 2004
- Fabrication of transition edge sensor X-ray microcalorimeters for Constellation-XNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2004