Study of the structural defects on carbon nanotubes in metal matrix composites processed by severe plastic deformation
Authors:
- Frank MuecklichFMFrank Muecklich
- Sebastian SuarezSebastian Suarez
Preprint
Abstract
Carbon nanotubes (CNT) have been recently proposed as stabilizers against grain growth that can happen even at low temperature inputs in nano-crystalline and ultrafine-grained materials obtained by severe plastic deformation. In this study, we analyzed the evolution of the structural defects on the nanotubes in CNT-reinforced nickel matrix composites with different reinforcement weight fractions. The composites were processed by high pressure torsion, and we used Raman spectroscopy as the main characterization technique. The results indicate that for CNT subjected to highly energetic processing, it is not sufficient to analyze only the ID/IG ratio (as proposed in the available literature), but it is also necessary to evaluate the shifting of the G band, which traces the amorphization trajectory undergone by the CNT. Furthermore, we observed that the deformation suffered by the CNT is related to the accumulated strain and varies with the partial CNT fractions of these composites. This is related to their capacity to withstand the plastic strain that occurs during deformation. In addition, the defective state reaches a saturation before achieving the saturation in the microstructural refinement. These results will help to efficiently optimize the processing of this type of engineering composites.Keywords
All Related Versions
- Version 1, 2020-10-20, ArXiv
- Published version: Carbon, 125, 156.
This publication has 31 references indexed in Scilit:
- Carbon Nanoparticle‐Reinforced Metal Matrix Composites: Microstructural Tailoring and Predictive ModelingAdvanced Engineering Materials, 2017
- Quantitative Analyses of MWCNT‐Ti Powder Mixtures using Raman Spectroscopy: The Influence of Milling Parameters on Nanostructural EvolutionAdvanced Engineering Materials, 2015
- Consolidation of Carbon Nanotube Reinforced Aluminum Matrix Composites by High-Pressure TorsionMetallurgical and Materials Transactions A, 2014
- Processing and interfacial reaction evaluation in MWCNT/Ni compositesPhysica Status Solidi (a), 2014
- Mechanical behavior of ultrafine-grained Ni–carbon nanotube compositeJournal of Materials Science, 2013
- Explosive Shock-Wave Consolidation of Aluminum Powder/Carbon Nanotube Aggregate Mixtures: Optical and Electron MetallographyMetallurgical and Materials Transactions A, 2007
- An Approach to Obtaining Homogeneously Dispersed Carbon Nanotubes in Al Powders for Preparing Reinforced Al‐Matrix CompositesAdvanced Materials, 2007
- Homogenization of metal matrix composites by high-pressure torsionMetallurgical and Materials Transactions A, 2005
- Extraordinary Strengthening Effect of Carbon Nanotubes in Metal‐Matrix Nanocomposites Processed by Molecular‐Level MixingAdvanced Materials, 2005
- Equivalent Strains in Severe Plastic DeformationAdvanced Engineering Materials, 2003