2D Numerical Simulation of Improving Wellbore Stability in Shale Using Nanoparticles Based Drilling Fluid
Open Access
Abstract
The past decade has seen increased focus on nanoparticle (NP) based drilling fluid to promote wellbore stability in shales. With the plugging of NP into shale pores, the fluid pressure transmission can be retarded and wellbore stability can be improved. For better understanding of the interaction between shale and NP based drilling fluid based on previous pressure transmission tests (PTTs) on Atoka shale samples, this paper reports the numerical simulation findings of wellbore stability in the presence of NP based drilling fluid, using the 2D fluid-solid coupling model in FLAC3D™ software. The results of previous PTT are discussed first, where the steps of numerical simulation, the simulation on pore fluid pressure transmission, the distribution of stress and the deformation of surrounding rock are presented. The mechanisms of NP in reducing permeability and stabilizing shale are also discussed. Results showed that fluid filtrate from water-based drilling fluid had a strong tendency to invade the shale matrix and increase the likelihood of wellbore instability in shales. However, the pore fluid pressure near wellbore areas could be minimized by plugging silica NP into the nanoscale pores of shales, which is consistent with previous PTT. Pore pressure transmission boundaries could also be restricted with silica NP. Furthermore, the stress differential and shear stress of surrounding rock near the wellbore was reduced in the presence of NP. The plastic yield zone was minimized to improve wellbore stability. The plugging mechanism of NP may be attributed to the electrostatic and electrodynamic interactions between NP and shale surfaces that are governed by Derjaguin-Landau-Verwey-Overbeek (DLVO) forces, which allowed NP to approach shale surfaces and adhere to them. We also found that discretization of the simulation model was beneficial in distinguishing the yield zone distribution of the surrounding rock in shales. The combination of PTT and the 2D numerical simulation offers a better understanding of how NP-based drilling fluid can be developed to address wellbore stability issues in shales.Keywords
Funding Information
- National Natural Science Foundation of China (41072111)
- CNPC Innovation Foundation (2014D-5006-0308)
- Key Project of Natural Science Foundation of Hubei Province (2015CFA135)
This publication has 40 references indexed in Scilit:
- Enhancing the physical plugging behavior of colloidal silica nanoparticles using binomial size distributionJournal of Natural Gas Science and Engineering, 2016
- Experimental Study and Stabilization Mechanisms of Silica Nanoparticles Based Brine Mud with High Temperature Resistance for Horizontal Shale Gas WellsJournal of Nanomaterials, 2015
- Improvement of wellbore stability in shale using nanoparticlesJournal of Petroleum Science and Engineering, 2013
- Decreasing Water Invasion Into Atoka Shale Using Nonmodified Silica NanoparticlesSPE Drilling & Completion, 2012
- Shale inhibitive properties of polyether diamine in water-based drilling fluidJournal of Petroleum Science and Engineering, 2011
- Wellbore-Stability Performance of Water-Based Mud AdditivesSPE Drilling & Completion, 2009
- Pore-throat sizes in sandstones, tight sandstones, and shalesAAPG Bulletin, 2009
- Transport in Shales and the Design of Improved Water-Based Shale Drilling FluidsSPE Drilling & Completion, 1996
- Quantitative Determination of the Mechanical Properties of ShalesSPE Drilling Engineering, 1992
- Shale Control with Balanced-Activity Oil-Continuous MudsJournal of Petroleum Technology, 1970