K-Based Geopolymer from metakaolin: roles of K/Al ratio and water or steam Curing at different temperatures
Open Access
- 30 June 2016
- journal article
- Published by Editorial CSIC in Materiales de Construcción
- Vol. 66 (322) , e081
Abstract
K-based geopolymer binder was prepared by reacting metakaolin with alkaline solutions having different potassium contents and by water curing at room temperature and 80 °C as well as steam curing at 150 and 180 °C. The phase formation, microstructure and Al and Si nearest neighbor environments were studied using XRD, TEM and 27Al and 29Si MAS NMR spectroscopy, respectively. The results revealed that amorphous alumino-silicates were predominant in geopolymer prepared by curing up to 28 days at room temperature or at 80 °C. The amorphous alumino-silicates persisted after hydrothermal treatment at 150 °C/48 hrs and even at 180 °C/30 hrs. However, the samples cured hydrothermally at 180 °C/48 hrs revealed formation of crystalline potassium aluminum silicate and chabazite phases. The Al nearest neighbor environments was not significantly affected by increasing the K/Al ratio up to 1.55 or by the curing temperatures. On the other hand, the geopolymer reaction appears to have increased when cured at 80 °C or steam cured at 150° and 180 °C and crystalline aluminosilicates resulted when the geopolymer sample was hydrothermally treated at 180 °C/48 hrs.Keywords
This publication has 12 references indexed in Scilit:
- Behavior of metakaolin-based potassium geopolymers in acidic solutionsJournal of Non-Crystalline Solids, 2013
- Inorganic polymers from alkali activation of metakaolin: Effect of setting and curing on structureJournal of Solid State Chemistry, 2013
- The effect of temperature on the geopolymerization process of a metakaolin-based geopolymerMaterials Letters, 2011
- The Effect of Curing Temperature on Physical and Chemical Properties of GeopolymersPhysics Procedia, 2011
- The Effects of Temperature on the Local Structure of Metakaolin‐Based Geopolymer Binder: A Neutron Pair Distribution Function InvestigationJournal of the American Ceramic Society, 2010
- Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: Part I—Low Si/Al ratio systemsJournal of Materials Science, 2007
- Geopolymer technology: the current state of the artJournal of Materials Science, 2006
- Understanding the relationship between geopolymer composition, microstructure and mechanical propertiesColloids and Surfaces A: Physicochemical and Engineering Aspects, 2005
- Relationships between composition, structure and strength of inorganic polymersJournal of Materials Science, 2005
- Synthesis and thermal behaviour of potassium sialate geopolymersMaterials Letters, 2003