Predicting homogenized mechanical properties of 3D FFF-printed grid infills via multi-scale simulation
- 9 October 2026
- journal article
- Published by Emerald Publishing in Rapid Prototyping Journal
- p. 1-19
Abstract
Purpose: This study aims to find the homogenized mechanical response of fused filament fabrication (FFF) components containing infill. More importantly, promotes a methodology to predict the elastic properties owing to microscopic fabrications. Design/methodology/approach: Cubic specimens fabricated from polylactic acid (PLA) were manufactured over five infill densities (20%, 40%, 60%, 80% and 100%) and two raster angles (−45°/45° and 0°/90°). Quasi-static compression tests were conducted to evaluate the homogenized elastic modulus (E) along three orthogonal directions. The multi-scale finite element modeling used a periodic boundary condition (PBC) formulation to compute the effect of voids (microscale unit cell) and layer deposition direction (mesoscale unit cell) on the behavior of a cubic specimen (macroscale unit cell). Findings: The trend of Young’s modulus with increasing infill density for both cell arrangements is the main result. The representative volume element method using PBC was able to precisely predict infill structures’ elastic responses and shows a good agreement with experimental results. Originality/value: The multidirectional experimental method provides a comprehensive perspective of the structures, and the conducted simulation in comparison to previous studies reduces the modeling challenges and computational effort effectively. This method not only quantifies the stiffness relations in three directions, but also uses step-wise simulation to provide the reason for the difference.Keywords
This publication has 45 references indexed in Scilit:
- Effect of Microscale Fabrication on Multi‐Directional Mechanical Properties of Additively Manufactured Poly Lactic Acid With Grid InfillsApplied Research, 2025
- Multiscale modelling and characterisation of fused filament fabricated neat and graphene nanoplatelet reinforced G-polymersProgress in Additive Manufacturing, 2024
- Optimizing the flexural properties of additively manufactured PETG: a multi-objective approachThe International Journal of Advanced Manufacturing Technology, 2024
- Anisotropic modeling of material behavior for additively manufactured parts made by material extrusionThe International Journal of Advanced Manufacturing Technology, 2023
- Effect of infill pattern scaling on mechanical properties of FDM-printed PLA specimensProgress in Additive Manufacturing, 2023
- A multiscale modeling approach of the Fused Filament Fabrication process to predict the mechanical response of 3D printed partsAdditive Manufacturing, 2022
- Evolution of global and local deformation in additively manufactured octet truss lattice structuresAdditive Manufacturing Letters, 2021
- Analytical and numerical modeling of voids in additively manufactured thermoplastic partsAdditive Manufacturing, 2021
- Non-destructive simulation of node defects in additively manufactured lattice structuresAdditive Manufacturing, 2020
- Development of an ABAQUS plugin tool for periodic RVE homogenisationEngineering with Computers, 2018