Corrosion of MgO—MgAl2O4 Spinel Refractory Bricks by Calcium Aluminosilicate Slag
Authors:
- 1 February 1997
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 80 (2) , 461-471
Abstract
Microstructural analysis of MgO—MgAl2O4 refractory bricks corroded at 1400–1450°C by calcium aluminosilicate slag reveals secondary spinel, monticellite, merwinite, and MgO as microscopic corrosion products, generally forming in this sequence as the brick is penetrated. The secondary spinel forms an incomplete layer close to (but not at) the MgO grain. Thermodynamic calculations are used to support a detailed model of the corrosion mechanism.Keywords
This publication has 12 references indexed in Scilit:
- The “Direct Bond” in Magnesia Chromite and Magnesia Spinel RefractoriesJournal of the American Ceramic Society, 1995
- Attempting to Predict the High Temperature Corrosion of Oxide Ceramics by Molten Silicates1994
- Critical evaluation and optimization of the thermodynamic properties and phase diagrams of the CaO-Al2O3, Al2O3-SiO2, and CaO-Al2O3-SiO2 systemsMetallurgical Transactions B, 1993
- Indirect Dissolution of (Al, Cr) 2 O 3 in CaO—MgO—Al 2 O 3 —SiO 2 (CMAS) MeltsJournal of the American Ceramic Society, 1991
- Direct and Indirect Dissolution of Sapphire in Calcia–Magnesia–Alumina–Silica Melts: Dissolution KineticsJournal of the American Ceramic Society, 1990
- Indirect Dissolution of Sapphire into Calcia‐Magnesia‐Alumina‐Silica Melts: Electron Microprobe Analysis of the Dissolution ProcessJournal of the American Ceramic Society, 1990
- Indirect Dissolution of Sapphire into Silicate MeltsJournal of the American Ceramic Society, 1988
- Thermodynamic analysis of ordered liquid solutions by a modified quasichemical approach—Application to silicate slagsMetallurgical Transactions B, 1986
- Dissolution in Ceramic Systems: 11, Dissolution of Aluminu, Mullite, Anorthite, and Silica in a Calcium‐Aluminum‐Silicate SlagJournal of the American Ceramic Society, 1964
- Viscosity Studies of System CaO–MgO–Al 2 O 3 –SiO 2 : III, 35, 45, and 50% SiO 2Journal of the American Ceramic Society, 1952