Thermoplastic Blends of PP and Waste Rubber Powder: Effects of Compatibilizer on Tensile Properties, Thermal Behavior and Decomposition Kinetics
Authors:
- 27 July 2018
- journal article
- research article
- Published by Walter de Gruyter GmbH in International Polymer Processing
- Vol. 33 (4) , 460-470
Abstract
To improve the performances of waste rubber powder filled polypropylene (PP/WRP) blends, WRP was modified by γ-aminopropyltriethoxysilane (APTES) via mechano-chemical method, and then maleic anhydride (MAH) grafted PP (mPP) and MAH grafted ethylene-α-octene copolymer (mEOC) were chosen as the interfacial compatibilizers. The PP/WRP blends were prepared by melt-compounding and compression, and their morphological structures, tensile properties and thermal behavior were investigated carefully. Results showed that modification of APTES decreased the surface energy of WRP and facilitated its compatibility to PP. Both mPP and mEOC could further enhance their interfacial bonding and mPP was superior to mEOC in increasing the tensile strength and elastic modulus. Thermal analysis revealed relative lower melting temperature and crystallinity but higher activation energy for PLA/WRP blends in comparison to pristine PP.Keywords
This publication has 30 references indexed in Scilit:
- Graphene/Polymer NanocompositesMacromolecules, 2010
- Characterization of the properties of thermoplastic elastomers containing waste rubber tire powderWaste Management, 2009
- Dynamic reaction involving surface modified waste ground rubber tire powder/polypropylenePolymer Engineering & Science, 2008
- Dynamic reaction inside co‐rotating twin screw extruder. I. Truck tire model material/polypropylene blendsJournal of Applied Polymer Science, 2007
- Polyethylene/ground tyre rubber blends: Influence of particle morphology and oxidation on mechanical propertiesPolymer Testing, 2007
- Analysis of thermal properties and impact strength of PP/SRT, PP/EPDM and PP/SRT/EPDM mixtures in single screw extruderPolymer Testing, 2006
- Thermoplastic Elastomers Derived from Scrap Rubber Powder/LLDPE Blend with LLDPE‐graft‐(Epoxidized Natural Rubber) Dual CompatibilizerMacromolecular Materials and Engineering, 2004
- Blends of plasticized poly(vinyl chloride) and waste flexible poly(vinyl chloride) with waste nitrile rubber powderJournal of Applied Polymer Science, 2003
- Thermoplastic Elastomers and Rubber-Toughened Plastics from Recycled Rubber and PlasticsRubber Chemistry and Technology, 2002
- Plastic/Rubber Blends of Ultrasonically Devulcanized GRT with HDPEJournal of Elastomers & Plastics, 2001