Interconnect metals beyond copper: reliability challenges and opportunities
Authors:
- 1 December 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 5.3.1-5.3.4
Abstract
Reliability challenges of candidate metal systems to replace traditional Cu wiring in future interconnects are discussed. From a reliability perspective, a key opportunity is electromigration improvement: due to their high melting point and slower self-diffusion kinetics, higher current carrying capabilities are possible. Also, the higher cohesive energy and better resistance to oxidation of some metals potentially allows for barrierless integration, although adhesion properties must be carefully optimized. Besides avoiding small grain pinning and enabling high aspect ratio trench fill, the main processing challenges are identified to be a) avoiding seam voids, b) adhesion, c) CMP and d) disruptive metal etch. Main reliability challenges are related to higher mechanical stresses and higher joule heating which could lead to delamination during further processing and packaging and to enhanced electromigration in nearby metal lines.Keywords
This publication has 14 references indexed in Scilit:
- Highly Scaled Ruthenium InterconnectsIEEE Electron Device Letters, 2017
- Modeling of Via Resistance for Advanced Technology NodesIEEE Transactions on Electron Devices, 2017
- Reliability study on cobalt and ruthenium as alternative metals for advanced interconnects2017
- Impact of Wire Geometry on Interconnect RC and Circuit DelayIEEE Transactions on Electron Devices, 2016
- 1/f noise measurements for faster evaluation of electromigration in advanced microelectronics interconnectionsJournal of Applied Physics, 2016
- CVD-Mn/CVD-Ru-based barrier/liner solution for advanced BEOL Cu/Low-k interconnects2016
- Electron mean free path in elemental metalsJournal of Applied Physics, 2016
- Direct etched Cu characterization for advanced interconnects2015
- Cobalt bottom-up contact and via prefill enabling advanced logic and DRAM technologies2015
- Alternative metals for advanced interconnects2014